Arts, 20.12.2020 04:40 jelopez4

Since it’s nearly christmas have some free points! merry christmas (or whatever you celebrate) :)

Answers: 2

Show answers

Another question on Arts

Arts, 22.06.2019 14:00

What is the value of an original etching by r h moore january 1886

Answers: 1

Answer

Arts, 23.06.2019 00:10

Why is macbeth fearless in the final battle

Answers: 2

Answer

Arts, 23.06.2019 05:30

Periods in art and music history generally mark

Answers: 1

Answer

Arts, 23.06.2019 07:30

Jim is an aspiring graphic designer looking for a purely technical graphic design position. which degree will him achieve his goal?

Answers: 1

Answer

You know the right answer?

Since it’s nearly christmas have some free points! merry christmas (or whatever you celebrate) :)...

Questions

Engineering, 26.07.2019 19:10

Agas refrigeration cycle with a pressure ratio of 4 uses helium as the working fluid. the temperature of the helium is -3°c at the compressor inlet an...

Engineering, 26.07.2019 19:10

Arectangular block having dimensions 20 cm x 30 cm x 40 cm is subjected to a hydrostatic stress of -50 kpa (i. e. under compression). calculate the ch...

Engineering, 26.07.2019 19:10

Astainless steel (sae 301) wire is stretched between rigid supports so that a stress of 40 mpa is induced in the wire at a temperature of 20°c. what w...

Engineering, 26.07.2019 19:10

During sheet metal bending, springback is the increase in bend angle and the increase in bend radius. the increase in bend angle and the decrease in b...

Engineering, 26.07.2019 19:10

Avehicle of 1 200 kg is moving at a speed of 40 km/h on an incline of 1 in 50. the total constant rolling and wind resistance is 600 n. the efficiency...

Engineering, 26.07.2019 19:10

Using a 2-d mohr's circle, prove the relationship between the elastic modulus e, shear modulus g and poisson ratio is given by the equation e=2g(1+v )...

Engineering, 26.07.2019 19:10

Consider a pb-40 %sn alloy. determine the composition of the first solid to form during solidification. (i) (ii) the amounts and composition of each p...

Engineering, 26.07.2019 19:10

Why might peck drilling be used instead of standard drilling with a 0.25" diameter hole which is 3 inches deep on a aluminum part? a. to save time b....

Engineering, 26.07.2019 19:10

Amulti-plate clutch connects two in-line shafts, through 4 plates on the driving and 3 plates driven shaft. the plates have inner and outer diameters...

Engineering, 26.07.2019 19:10

Ametal sphere of 6- in internal diameter is weighed on a beam balance when it is empty (all gas evacuated be- fore weighing). it is then filled with a...

Engineering, 26.07.2019 19:10

Afour-cylinder, two-stroke 2.4-l diesel engine that operates on an ideal diesel cycle has a compression ratio of 22 and a cutoff ratio of 1.8. air is...

Engineering, 26.07.2019 19:10

Aring of sae 301 stainless steel is to be placed on a shaft having a temperature of 20°c and a diam- eter of 55.200 mm. the inside diameter of the rin...

Engineering, 26.07.2019 19:10

Determine the change in the entropy of air, in kj/kg-k, as it undergoes a change of state from 100 kpa and 20°c to 600 kpa and 300°c using the equatio...

Engineering, 26.07.2019 19:10

What is one of the biggest drawback to using a conventional 3d printer for manufacturing parts? a. it can only print in metal materials such as alumi...

Engineering, 26.07.2019 19:10

During casting and solidification, shrinkage includes: a)-liquid contraction during cooling prior to solidification. b)-contraction during the phase...

Engineering, 26.07.2019 19:10

Afiber-reinforced polymer composite consists of a matrix of vinyl ester and reinforcing short fibers of e-glass. the volume fraction of e-glass fibres...

Engineering, 26.07.2019 19:10

Acentrifugal pump running at 500 rpm and at its maximum efficiency it is delivering a head of 30 m at a flow rate of 60 litres per minute if the rpm i...

Engineering, 26.07.2019 19:10

Ashaft of circular cross section (diameter = 3 in) is subjected to a bending moment of 3200 lb- ft. determine the bending stress at the surface of the...

Engineering, 26.07.2019 19:10

The nozzles of a simple impulse steam turbine are inclined at an angle of 20° to the direction of the path of the moving blades and steam leaves the n...

Engineering, 26.07.2019 19:10

Awinding drum raises a cage of mass 800 kg though a height 100 m. the winding drum has a mass of 200 kg and an effective radius of 0.5 m and a radius...