You need to start an experiment and the instructions are to mix 2 g of sodium bicarbonate with 50 ml of distilled water and then mix the solution. describe what lab apparatus you would use and what safety precautions you must observe when completing this experiment.

The materials needed for the experiment are as follows: weighing machine, foil paper, spatula, conical flasks, stirring rod and measuring cylinder. To measure out 2g of sodium carbonate, you need a sensitive weighing machine that has been properly zero. Put a small paper foil and put it on the weighing machine and adjust the machine to zero. Use your spatula to take sodium carbonate out of its container and put it gradually on the paper foil on the weighing machine until the weight is exactly 2g. With a measuring cylinder, measure out 50ml of distilled water and add the water to sodium carbonate, stirring it until all the particles dissolves. 
The following precautions are necessary: be properly dressed in lab coat, gloves and nose mask. Make sure you taking your reading at eye level when measuring distilled water. Measure out the distilled water first so that you can add sodium carbonate immediately you measure it out. This reduced the exposure time of the chemical.

Are you asking about a street map usage  if so here is your answer  a street map for a very limited area could simply be a bit map or a .jpg image.  but a more general map would probably store the streets as vectors.  but you shouldn't assume that there is one way to do it