Biology, 11.02.2022 21:40 yansaturnin

Question 26: Answer each of the following questions clearly and concisely.
1. Compare and discuss how cells store energy and release energy using ATP. Be specific!

2. Compare lactic acid fermentation and alcoholic fermentation by describing what pyruvic acid is changed into. Be sure to include what type of organism each one takes place in.

What is pyruvic acid changed into? Organism:
Alcoholic Fermentation

Lactic Acid Fermentation

3. Name the three processes of aerobic cellular respiration. What is the total ATP produced from one glucose?

3 Processes of Cellular Respiration:

4. Name the two stages of photosynthesis and list the starting molecule(s) and ending molecule(s) of each.

Stages Starting Molecule(s) Product(s)

5. What is the general chemical equation of photosynthesis?

6. When and why does our body use lactic acid fermentation?

7. Explain how the equations for photosynthesis and cellular respiration compare.

Question 27:
Critical Reading
Read these passages from the text and answer the questions that follow.
Fermentation
An important way of making ATP without oxygen is called fermentation. It involves glycolysis but not the other two stages of aerobic respiration. Many bacteria and yeasts carry out fermentation. People use these organisms to make yogurt, bread, wine, and biofuels. Human muscle cells also use fermentation. This occurs when muscle cells cannot get oxygen fast enough to meet their energy needs through aerobic respiration. There are two types of fermentation: lactic acid fermentation and alcoholic fermentation. Both types are described below.
Lactic Acid Fermentation
In lactic acid fermentation, pyruvic acid from glycolysis changes to lactic acid. In the process, NAD+ forms from NADH. NAD+, in turn, lets glycolysis continue. This results in additional molecules of ATP. This type of fermentation is carried out by the bacteria in yogurt. It is also used by your muscle cells when you work them hard and fast.
Did you ever run a race and notice that your muscles feel tired and sore afterward? This is because your muscle cells use lactic acid fermentation for energy. This causes lactic acid to build up in the muscles. It is the buildup of lactic acid that makes the muscles feel tired and sore.

Alcoholic Fermentation
In alcoholic fermentation, pyruvic acid changes to alcohol and carbon dioxide. NAD+ also forms from NADH, allowing glycolysis to continue making ATP. This type of fermentation is carried out by yeasts and some bacteria. It is used to make bread, wine, and biofuels.

Alcoholic fermentation produces ethanol and NAD+. The NAD+ allows glycolysis to continue making ATP.
Have your parents ever put corn in the gas tank of their car? They did if they used gas-containing ethanol. Ethanol is produced by the alcoholic fermentation of glucose in corn or other plants. This type of fermentation also explains why bread dough rises. Yeasts in bread dough use alcoholic fermentation and produce carbon dioxide gas. The gas forms bubbles in the dough, which causes the dough to expand. The bubbles also leave small holes in the bread after it bakes, making the bread light and fluffy.

Questions
1. What is fermentation?

2. Why is NAD+ so important in fermentation?

3. Both lactic acid fermentation and alcoholic fermentation begin with the same molecule. What is that molecule and where did it come from?

4. Why is bread light and fluffy?

5. Why do your muscles get sore after intense activity?

Answers: 2

Show answers

Answers

Answer from: nae878

(1) The energy is stored in the 2nd and 3rd phosphate bonds of ATP. When the 2nd and 3rd phosphate link breaks, energy is released, turning ATP to ADP. A third phosphate is added to ADP to convert it to ATP and store energy.

(2) Alcoholic fermentation takes place in yeast and results in the production of ethyl alchol from pyruvate.
Lactic acid fermentation takes place in animals and results in the production of lactic acid from pyruvate.
Neither of these processes will be slowed or stopped if there is no oxygen present.

(3) Glycolysis= 2 ATP
Krebs Cycle= 2 ATP
Electron Transport Chain= 32 ATP
Total ATP= 36 ATP

glycolysis, Krebs cycle, and electron transport chain

(4) Stage 1 is referred to as the light-dependent reaction stage.
6H2O and sunlight are the starting molecules.
ATP and NADPH are the last molecules (Nicotinamide adenine dinucleotide phosphate)

Cycle of Calvin.
6CO2 with ADP (Adenosine diphosphate)

(5) In this case, when 6 atoms of Carbon and 12 atoms of water are mixed together, the plant gets glucose, 6 atoms of water, and 6 atoms of oxygen out of it.

(6) Why? In the absence of Lactic acid fermentation, our bodies would be unable to perform many activities, including allowing our muscles to continue creating ATP from glucose when oxygen levels are low or during severe activity, as well as allowing bacteria to carry out its functions in our bodies.
When? When our cells want energy, they break down basic chemicals such as glycolysis in order to produce it.

(7) Photosynthesis is the process through which carbon dioxide and water are converted into glucose and oxygen. During the process of respiration, glucose and oxygen are exchanged for carbon dioxide and water. glucose (C6H12O6) combined with oxygen (O2) yields CO2 (Carbon Dioxide) with water (H2O) and ATP energy.

(1) During the fermentation process, an organism turns a carbohydrate into either alcohol or acid, which is carried out in the absence of oxygen.

(2) Because glycolysis is dependent on it, glycolysis also recycles it in order to allow it to enter glycolysis.

(3) Glycolysis and pyruvate

(4) When yeast rises, air bubbles are created.

(5) Lactic acid builds up in muscles after strenuous exercise, making them sore.

Answer from: Quest

d concave shape of wave rock

explanation:

the concave shape of wave rock is a very good evidence that supports the evolution of earth due to chemical weathering. if we talk about structure of wave rock, studies have estimated that it is around 2.7 billion years old. it also serves as the foundation of evidence that it was the place where australian continent began to form.

how the structure of wave rock was created?

studies suggest that structure of wave rock was created when the surrounded area was started to weather due to which deposition of material started on the part of land which now contains wave rock.

the structure of wave rock is considered to be one of the best-known landforms in australia. at the height of around 15 cm, there can be found flared slopes which formulate the margins of hyden rock. it is now assumed by geologists that wave rock was created by subsurface water-induced weathering and not by glaciers, waves or wind.

due to deposition of material over the period of long time, the wave rock became tougher and tougher due to weathering from surrounding terrain. this makes it a physical evidence that supports the evolution of earth due to chemical weathering.

hope it !

Answer from: Quest

11. gene12. allele13. crossing over14. linked15. gene16. x17. males, femalesapologies if numbers are out of order.

Another question on Biology

Biology, 21.06.2019 19:50

Which experiment would most likely contain experimental bias

Answers: 1

Answer

Biology, 22.06.2019 03:30

In a hypothetical breed of dogs, coat color is controlled by two genes. there are six different coat colors in this breed: black, brown, cream, gray, silver, and tan. consider the following crosses. cross 1: black females from a lineage of all black dogs are crossed with brown males from a lineage of all brown dogs. f1 males and females are all black. when f1 are intercrossed, f2 males and females are black or brown. cross 2: black females from a lineage of all black dogs are crossed with tan males from a lineage where all males are tan and all females are cream. f1 males are black, f1 females are gray. when f1 are intercrossed, f2 males and females are black, brown, gray, or tan. cross 3: silver females from a lineage where all females are silver and all males are gray are crossed with brown males from a lineage of all brown dogs. f1 males and females are all gray. when f1 are intercrossed, f2 males are black, brown, gray, or tan, f2 females are cream, gray, silver, or tan. select the correct statements regarding the mode of inheritance of the coat color genes. a) both genes are x-linked. b) both genes are autosomal. c) one of the genes modifies the expression of the other gene. d) each gene has an additive effect on the intensity of coat color. e) each gene independently specifies three colors. f) one of the genes is autosomal, and the other is x-linked.

Answers: 2

Answer

Biology, 22.06.2019 04:30

Which of the following describes a boom period? a. as one population increases, another population decreases. b. as one population increases, the other population also increases. c. as one population decreases, another population increases. d. as one population decreases, another population also decreases

Answers: 2

Answer

Biology, 22.06.2019 15:20

Suppose a particular species of tulip plant has three alleles for the gene that codes for flower color. the cr allele produces red tulips, the cp allele produces purple tulips, and the cw allele produces white tulips. cr is dominant over cp and cw, and cp is dominant over cw. for each of the following crosses, determine the expected ratio of offspring for each flower color. cr cp x cp cw cr cw x cp cw 1 red: 1 purple : 0 white, 1 red: 2 purple: 1 white, 2 red: 1 purple 1 white, 1 red: 3 purple : 0 white, 2 red: 0 purple : 2 white, 2 red: 2 purple : 0 white

Answers: 2

Answer

You know the right answer?

Question 26: Answer each of the following questions clearly and concisely.
1. Compare and di...

Questions