Cost Allocation and Environmental Processes-Ethical Issues
California Circuits Company (...
![subject](/tpl/images/cats/ekonomika.png)
Business, 24.03.2020 04:48 lindseyreneesmith7
Cost Allocation and Environmental Processes-Ethical Issues
California Circuits Company (3C) manufactures a variety of components. Its Valley plant specializes in two electronic components used in circuit boards. These components serve the same function and perform equally well. The difference in the two products is the raw material. The XL- D chip is the older of the two components and is made with a metal that requires a wash prior to assembly. Originally, the plant released the wastewater directly into a local river. Several years ago, the company was ordered to treat the wastewater before its release, and it installed relatively expensive equipment. While the equipment is fully depreciated, annual operating expenses of $250,000 are still incurred for wastewater treatment.
Two years ago, company scientists developed an alloy with all of the properties of the raw materials used in XL-D that generates no wastewater. Some prototype components using the new material were produced and tested and found to be indistinguishable from the old components in every way relating to their fitness for use. The only difference is that the new alloy is more expensive than the old raw material. The company has been test-marketing the newer version of the component, referred to as XL-C, and is currently trying to decide its fate.
Manufacturing of both components begins in the Production Department and is completed in the Assembly Department. No other products are produced in the plant. The following provides information for the two components:
Units produced
Raw material costs per unit
Direct labor-hours per unit—Production
Direct labor-hours per unit—Assembly
Direct labor rate per hour—all labor
Machine-hours per unit—Production
Machine-hours per unit—Assembly
Testing hours per unit (all in production)
Shipping weight per unit (pounds)
Wastewater generated per unit (gallons)
XL-D XL-C
100,000 25,000
$12 $14
0.1 0.1
0.4 0.4
$20 $20
1.6 1.6
0.4 0.4
3.0 3.0
1.0 1.6
10.0 0.0
1
Annual overhead costs for the two departments follow:
Production Department Assembly Department
Supervision $ 100,000
Material handling 93,000
Testing 150,000
Wastewater treatment 250,000
Depreciation on equipment 400,000
Shipping 7,000
Total $ 1,000,000
$
$
240,000
40,000
0
0
100,000
120,000
500,000
The company president believes that it’s foolish to continue producing two essentially equivalent products. At the same time, the corporate image is somewhat tarnished because of a toxic dump found at another site (not the Valley plant). The president would like to be able to point to the Valley plant as an example of company research and development (R&D) working to provide an environmentally friendly product. The controller points out to the president that the company’s financial position is shaky, and it cannot afford to make products in any way other than the most cost-efficient one.
Required:
a. 3C’s current cost accounting system charges overhead to products based on direct labor cost using a single plantwide rate. What product costs will it report for the two products if the current allocation system is used?
b. The controller recently completed an executive education course describing the two-stage allocation procedure. Assume that the first stage allocates costs to departments and the second stage allocates costs to products. The controller believes that the costs will be more accurate if machine-hours are used to allocate Production Department costs and labor-hours are used to allocate Assembly Department costs. What product costs will be reported for the two products if the two-stage allocation process is used?
2
c. The company decides to compute product costs assuming an ABC system is implemented only in the Production Department. Overhead in Assembly will continue to be allocated based on direct labor cost. The cost drivers selected for the activity-based costing system are:
Overhead Item
Supervision
Material handling
Testing
Wastewater treatment
Depreciation on equipment
Shipping
Driver
Direct labor-hours
Material cost
Testing hours
Wastewater generated
Machine-hours
Weight
What product costs would be reported if this ABC system were implemented? Assume that the production mix and costs would remain as originally planned.
d. Please briefly discuss the advantages and disadvantages of the three cost allocation methods above, including traditional single plantwide rate cost allocation, two-stage departmental allocation, and activity-based costing. What is your suggestion for the president if you were the controller?
e. Because the two products are identical in their use, the controller argues that the decision should be made on cost alone. Do you agree? Explain.
![ansver](/tpl/images/cats/User.png)
Answers: 3
Another question on Business
![question](/tpl/images/cats/ekonomika.png)
Business, 22.06.2019 05:00
Which of the following are considered needs? check all that apply
Answers: 1
![question](/tpl/images/cats/ekonomika.png)
Business, 22.06.2019 11:30
Schonhardt corporation's relevant range of activity is 2,500 units to 5,500 units. when it produces and sells 4,000 units, its average costs per unit are as follows: averagecost per unitdirect materials $ 7.60direct labor $ 2.90variable manufacturing overhead $ 1.65fixed manufacturing overhead $ 2.90fixed selling expense $ 0.95fixed administrative expense $ 0.65sales commissions $ 0.75variable administrative expense $ 0.65if 4,500 units are produced, the total amount of fixed manufacturing cost incurred is closest to: multiple choicea $16,800b $11,400c $11,600d $15,400
Answers: 3
![question](/tpl/images/cats/ekonomika.png)
Business, 22.06.2019 13:40
A.j. was a newly hired attorney for idle time gaming, inc. even though he reported directly to the president of the company, a.j. noticed that the president always had time to converse with the director of sales, calling on him to get a pulse on legal/regulatory issues that, as the company attorney, a.j. could have probably handled. a.j. also noted that the hr manager’s administrative assistant was the go-to person for a number of things that would make life easier at work. a.j. was recognizing the culture at idle time gaming.
Answers: 3
![question](/tpl/images/cats/ekonomika.png)
Business, 22.06.2019 13:40
Computing equivalent units is especially important for: (a) goods that take a relatively short time to produce, such as plastic bottles. (b) goods with sustainability implications in their production processes. (c) goods that are started and completed during the same period. (d) goods that take a long time to produce, such as airplanes.
Answers: 2
You know the right answer?
Questions
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/istoriya.png)
History, 06.04.2021 23:10
![question](/tpl/images/cats/himiya.png)
Chemistry, 06.04.2021 23:10
![question](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 23:10
![question](/tpl/images/cats/himiya.png)
![question](/tpl/images/cats/biologiya.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 23:10
![question](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 23:10
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/biologiya.png)
Biology, 06.04.2021 23:10
![question](/tpl/images/cats/nemec.png)
![question](/tpl/images/cats/obshestvoznanie.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 23:10
![question](/tpl/images/cats/biologiya.png)
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/fizika.png)
![question](/tpl/images/cats/istoriya.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 06.04.2021 23:10