Business, 16.04.2020 01:43 vso227

The company uses the income statement approach for estimating bad bent. For the year ending December 31, 2020, credit sales amounted to 1090000. the estimating bad bebt is 0.7%

Answers: 2

Show answers

Answers

Answer from: Quest

sound is invisible, but sometimes we can feel it. when a kettle-drum is thumped with a stick that time the tight drum skin moving up and down very quickly for some time and then it pumped sound waves into the air. loudspeakers also work in a similar manner.

components of a speaker:

electromagnet

in order to translate an electrical signal into an audible sound, an electromagnet is used in looudspeakers

suspension

suspension is used to center the voice coil in the gap of the magnet and it exerts a restoring force to keep it there. suspension is used to limits the maximum mechanical excursion of the diaphragm and voice coil.

voice coil

voice coil is a coil of wire which is attached to the apex of a loudspeaker cone. it provides the motive force to the cone by the reaction of a magnetic field to the current passing through it.

cone

in a loudspeaker, a thin, semi-rigid membrane attached to the voice coil, which moves in a magnetic gap due to which it vibrates and produced sound. it is known as diaphragm and it can also be called a cone, though not all speaker diaphragms are cone-shaped.

surround

surround is also known as front suspension. surround is used to join the cone to the chassis. together with the suspension it controls the cone excursion, and it is also used to determine how energy which is travelling through the cone is absorbed, and how the speaker limits when it reaches the ends of its travel.

dustcap

dustcap is used to protect the voice coil from dust and dirt. it is a part of the cone.

how speaker work

the outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. the inner part is fixed to voice coil that sits just in front of a permanent magnet . when loudspeaker is hooked up to a stereo, electrical signals feed through the speaker cables into the coil. it will convert the coil into an electromagnet magnet . when electricity flows back and forth in the cables, the electromagnet either repels or attract the permanent magnet. this moves the coil back and forth, and it pull and push the loudspeaker cone. like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.in this way loudspeakers works.

Answer from: Quest

answer; interviews;

Answer from: Quest

Can you take a photo so i can see the table

Answer from: Quest

750 h and costs $0.60 per bulb.

Another question on Business

Business, 21.06.2019 20:20

Atoy manufacturer makes its own wind-up motors, which are then put into its toys. while the toy manufacturing process is continuous, the motors are intermittent flow. data on the manufacture of the motors appears below.annual demand (d) = 50,000 units daily subassembly production rate = 1,000setup cost (s) = $85 per batch daily subassembly usage rate = 200carrying cost = $.20 per unit per year(a) to minimize cost, how large should each batch of subassemblies be? (b) approximately how many days are required to produce a batch? (c) how long is a complete cycle? (d) what is the average inventory for this problem? (e) what is the total annual inventory cost (holding plus setup) of the optimal behavior in this problem?

Answers: 2

Answer

Business, 22.06.2019 06:40

Depreciation on the company's equipment for 2017 is computed to be $18,000.the prepaid insurance account had a $6,000 debit balance at december 31, 2017, before adjusting for the costs of any expired coverage. an analysis of the company's insurance policies showed that $1,100 of unexpired insurance coverage remains.the office supplies account had a $700 debit balance on december 31, 2016; and $3,480 of office supplies were purchased during the year. the december 31, 2017, physical count showed $300 of supplies available.two-thirds of the work related to $15,000 of cash received in advance was performed this period.the prepaid insurance account had a $6,800 debit balance at december 31, 2017, before adjusting for the costs of any expired coverage. an analysis of insurance policies showed that $5,800 of coverage had expired.wage expenses of $3,200 have been incurred but are not paid as of december 31, 2017.

Answers: 3

Answer

Business, 22.06.2019 07:50

The questions of economics address which of the following ? check all that apply

Answers: 3

Answer

Business, 22.06.2019 19:10

Imagine us is a startup that offers high definition 3d prenatal ultrasounds for high-end customers. the service process includes four activities that are conducted in the sequence described below. (the time required for each activity is shown in parentheses): activity 1: welcome a patient and explain the procedure. (20 minutes)activity 2: prep the patient (e.g., show them to the room, apply ultrasound gel). (17 minutes) (*your id number represents the amount of time needed to complete this task)activity 3: take images. (5 minutes)activity 4: discuss diagnostic with patient. (20 minutes)at each location there are employees (servers) s1, s2, and s3. the assignment of tasks to servers is the following: s1 does activities 1 and 2.s2 does activity 3.s3 does activity 4.a. what is the capacity of this process (in customers per hour)? b. suppose 3 patients arrive every hour on average. ignoring any “start of day” or “end of day” effects, what are the utilizations of all three servers (%)? c. suppose each activity can be done by any server and any server can do any set of activities. however, each activity is done by only one server. for example, a possible assignment includes: s1 does activity 1, s2 does activity 2, and s3 does activities 3 and 4. of course, the original assignment of servers to activities is also feasible. what is the maximum capacity of the process (in customers per hour)? d. now consider the capacity measures in (c) and (a), what is the percentage change? why can you improve capacity without using additional resources? (there is no free lunch, right? )note: for all hw assignments, show your process of getting the results. only providing the final answers is not acceptable and will get 0%. if necessary, use a separate sheet of paper to show your work.

Answers: 3

Answer

You know the right answer?

The company uses the income statement approach for estimating bad bent. For the year ending December...

Questions