Business, 13.10.2020 22:01 amberskids2

Temperature and Chemicals are used in which process?

Answers: 2

Show answers

Answers

Answer from: edeliz3886

Cooking

Explanation:

because cooking use heat. heat is a temperature and chemicals is gas.

Answer from: Quest

sound is invisible, but sometimes we can feel it. when a kettle-drum is thumped with a stick that time the tight drum skin moving up and down very quickly for some time and then it pumped sound waves into the air. loudspeakers also work in a similar manner.

components of a speaker:

electromagnet

in order to translate an electrical signal into an audible sound, an electromagnet is used in looudspeakers

suspension

suspension is used to center the voice coil in the gap of the magnet and it exerts a restoring force to keep it there. suspension is used to limits the maximum mechanical excursion of the diaphragm and voice coil.

voice coil

voice coil is a coil of wire which is attached to the apex of a loudspeaker cone. it provides the motive force to the cone by the reaction of a magnetic field to the current passing through it.

cone

in a loudspeaker, a thin, semi-rigid membrane attached to the voice coil, which moves in a magnetic gap due to which it vibrates and produced sound. it is known as diaphragm and it can also be called a cone, though not all speaker diaphragms are cone-shaped.

surround

surround is also known as front suspension. surround is used to join the cone to the chassis. together with the suspension it controls the cone excursion, and it is also used to determine how energy which is travelling through the cone is absorbed, and how the speaker limits when it reaches the ends of its travel.

dustcap

dustcap is used to protect the voice coil from dust and dirt. it is a part of the cone.

how speaker work

the outer part of the cone is fastened to the outer part of the loudspeaker's circular metal rim. the inner part is fixed to voice coil that sits just in front of a permanent magnet . when loudspeaker is hooked up to a stereo, electrical signals feed through the speaker cables into the coil. it will convert the coil into an electromagnet magnet . when electricity flows back and forth in the cables, the electromagnet either repels or attract the permanent magnet. this moves the coil back and forth, and it pull and push the loudspeaker cone. like a drum skin vibrating back and forth, the moving cone pumps sounds out into the air.in this way loudspeakers works.

Answer from: Quest

b. take periodic breaks and alternate between tasks.

will increase work efficiency, and avoid health issues.

Another question on Business

Business, 21.06.2019 20:30

Which of the following pairs is most similar to each other? a. barter goods and fiat money b. digital money and barter goods c. fiat money and digital money d. commodity money and digital money

Answers: 1

Answer

Business, 21.06.2019 21:10

Of the roles commonly found in the development, maintenance, and compliance efforts related to a policy and standards library, which of the following has the responsibilities of directing policies and procedures designed to protect information resources, identifying vulnerabilities, and developing a security awareness program?

Answers: 3

Answer

Business, 22.06.2019 10:00

In a chapter 7 bankruptcy, a debtor:

Answers: 2

Answer

Business, 22.06.2019 12:30

M. cotteleer electronics supplies microcomputer circuitry to a company that incorporates microprocessors into refrigerators and other home appliances. one of the components has an annual demand of 235 units, and this is constant throughout the year. carrying cost is estimated to be $1.25 per unit per year, and the ordering (setup) cost is $21 per order. a) to minimize cost, how many units should be ordered each time an order is placed? b) how many orders per year are needed with the optimal policy? c) what is the average inventory if costs are minimized? d) suppose that the ordering cost is not $21, and cotteleer has been ordering 125 units each time an order is placed. for this order policy (of q = 125) to be optimal, determine what the ordering cost would have to be.