Astove's walls are made up of a flat inner insulating board 0.01m thick (thermal conductivity: 0.2 w m-1k-1) and a flat outer steel sheet 0.01m thick (thermal conductivity: 26 w m-1k-1). a mineral-wool (thermal conductivity: 0.065 w m-1k-1) is placed between these sheets. the inside temperature of the wall is 773k, how thick does the insulation have to be to maintain the outside wall temperature at 323k ? assume that the ambient air temperature is 293k and the outside convective heat transfer coefficient: 5 w m-2k-1.
determine the heat transfer current and calculate the required length of thw mineral-wool insulation.

Lem 2 the data below are for the system ethyl propyl ether (1)-chloroform (2) at 0.5 bar. use the data to answer the following questions (all questions refer to p d 0: 5 bar). a) what are the boiling points of the pure components at 0.5 bar? b) a mixture with the overall composition z1 d 0: 1 is brought to 47.6ä±c, 0.5 bar. what is the phase? c) 100 mole of a mixture with z1 d 0: 1 (state a) is mixed with 22 mole of pure ethyl propyl ether vapor (state b). the mixing takes place at 47.6 ä±c, 0.5. bar. what is the phase of the resulting mixture (state c)? if the state is a v/l mixture report the number of moles and mole fractions in each phase. d) plot the txy graph and show states a, b and c. the graph must be done by computer and should be properly annotated. ethyl propyl ether (1) - chloroform (2) at 0.5 bar t ( ä±c) x1 y1 t ( ä±c) x1 y1 42.9 0.000 0.000 49.0 0.470 0.455 43.0 0.020 0.010 49.1 0.520 0.520 43.9 0.065 0.029 48.9 0.567 0.592 45.4 0.156 0.089 48.3 0.652 0.720 46.4 0.215 0.142 47.6 0.745 0.815 47.6 0.296 0.223 46.7 0.822 0.872 48.3 0.362 0.302 45.7 0.907 0.937 48.7 0.410 0.375 44.6 1.000

What is the equilibrium constant of aa+bb=cc+dd

Joan writes four numbers on the board in standard form, and then she writes their scientific notation