Chemistry, 28.08.2020 14:01 pattydixon6

Is another way in which nitrogen gets fixed in the soil

Answers: 2

Show answers

Answers

Answer from: Quest

where are the choice options?

Answer from: Quest

7is b8 is d9 is c10 is a11 is d

Answer from: Quest

Answer : option c) heat is released during the process.explanation :

the enthalpy of formation of water is given as -285.8kj/mol, which states that the enthalpy of formation is negative.

negative enthalpy of formation indicates that the heat is released during the reaction process. the heat is released from reaction to the surroundings the enthalpy is expressed with a negative sign with the energy given out in the reaction process.

the formation of water takes place by giving out heat which is -285.8 kj/mol.

Answer from: Quest

the missing options are :

(1) lower boiling point and a lower freezing point(2) lower boiling point and a higher freezing point(3) higher boiling point and a lower freezing point(4) higher boiling point and a higher freezing point

answer : the correct answer is option (3) higher boiling point and a lower freezing point

explanation :

when a non volatile solute is added to a solvent like water, it results in elevation of boiling point.

let us find the increase in boiling point of water when cacl₂ is added to water to make a solution of 1 m

step 1 : find molality of the solution

let us assume we have 1 l of solution.

$m = \frac{moles (solute)}{l ( solution)}$

$1 m = \frac{moles (cacl_{2})}{1 l }= 1 mol cacl_{2}$

let us convert this to grams of cacl₂.

molar mass of cacl2 is 111 g/mol

grams of cacl₂ = $1 mol \times \frac{111g}{mol} = 111 g cacl_{2}$

mass of solute = 111 g

assuming density of solution same as water which is 1g/ml we have ,

mass of solution = density * volume

mass of solution = $\frac{1g}{ml} \times 1000 ml = 1000 g$

mass of solution = mass of solvent + mass of solute

mass of solute = 1000g - 111g

mass of solute 889 g = 0.889 kg

the molality of the solution can be calculated as

$molality = \frac{mol (solute)}{kg ( solvent)}$

$molality = \frac{1mol}{0.889kg}$

molality = 1.12 m

step 2 : find boiling point elevation.

the elevation in boiling point is calculated as

$\bigtriangleup t_{b} = i \times k_{b} \times m$

here δtb = boiling point elevation

i = vant hoff factor which is the number of ions formed by the solute .

cacl₂ dissociates as $cacl_{2} \rightarrow ca^{2+} + 2 cl^{-}$

it forms 3 ions . therefore,

i = 3

m = molality which is 1.12 m

kb is constant for a given solvent. for water it is 0.512

$\bigtriangleup t_{b} = 3 \times 0.512 \times 1.12$

$\bigtriangleup t_{b} = 1.7$

the boiling point of water increases by 1.7 °c

step 3: find freezing point depression.

when a non volatile solute is added to water, it results in decrease in freezing point.

the formula to find freezing point depression is

$\bigtriangleup t_{f} = i \times k_{f} \times m$

kf is constant for water and its value is 1.86

$\bigtriangleup t_{f} = 3 \times 1.86 \times 1.12$

$\bigtriangleup t_{f} = 6.2$

the freezing point of water decreases by 6.2 °c

therefore we can say that, the solution will have a higher boiling point and a lower freezing point

Another question on Chemistry

Chemistry, 21.06.2019 13:00

Compare these two waves : a. the blue wave has a higher pitch, but the orange wave is louder. b.the blue and orange waves have the same volume, but the blue wave has a higher pitch. c.the blue and orange waves have the same pitch, but the blue wave is louder. d.the orange wave has a higher pitch, but the blue wave is louder.

Answers: 1

Answer

Chemistry, 22.06.2019 00:00

Substance x has a fixed volume, and the attraction between its particles is strong .substance y had widely spread out particles and can be compressed what can most likely be concluded about these substances

Answers: 2

Answer

Chemistry, 22.06.2019 05:30

A3.37-mg sample of protein was chemically digested to convert its nitrogen into ammonia and then diluted to 100.0 ml. then 10.0 ml of this solution was placed in a 50-ml volumetric flask and treated with 5 ml of phenol solution plus 2 ml of sodium hypochlorite solution. the sample was diluted to 50.0 ml, and the absorbance at 625 nm was measured in a 1.00-cm cuvette and found to be 0.486. for reference, a standard solution was prepared from 10.0 mg of nh4cl (molar mass = 53.49 grams/mole) dissolved in 1.00 l of water. then 10.0 ml of this standard was placed in a 50-ml volumetric flask, treated in the same manner as the unknown, and the absorbance found to be 0.323. finally, a reagent blank was prepared using distilled water in place of unknown, it was treated in the same manner as the unknown, and the absorbance found to be 0.076. calculate the weight percent of nitrogen in the protein.

Answers: 1

Answer

Chemistry, 22.06.2019 12:40

Quiz1. which physical state of nitrogen has the highest entropy? a solid© b gasoc liquid

Answers: 1

Answer

You know the right answer?

Is another way in which nitrogen gets fixed in the soil...

Questions