Chemistry, 20.09.2020 17:01 nev322

A common issue in organic chemistry processes is trace contamination. Organic solvents can become contaminated with water. One method of removing the water contamination is to freeze dry the solvent. Unfortunately, not all solvents, like acetonitrile, are compatible with this method. Another method is to add a chemical to react with the water. One such chemical is calcium hydride, which will react to form calcium hydroxide and hydrogen gas. When you checked the chemical inventory, you realized you only had 24.6g of calcium hydride on hand. If you had a 1.5L container of organic solvent that contained 14.0g of water, what will be the outcome of your attempt to dewater the solvent?

Answers: 1

Show answers

Answers

Answer from: leslie4759

Complete Question

A common issue in organic chemistry processes is trace contamination. Organic solvents can become contaminated with water. One method of removing the water contamination is to freeze dry the solvent. Unfortunately, not all solvents, like acetonitrile, are compatible with this method. Another method is to add a chemical to react with the water. One such chemical is calcium hydride, which will react to form calcium hydroxide and hydrogen gas. When you checked the chemical inventory, you realized you only had 24.6g of calcium hydride on hand. If you had a 1.5L container of organic solvent that contained 14.0g of water, what will be the outcome of your attempt to dewater the solvent?

A ) There is no way to tell

B) CaH2 will be left over

C water will be left over

D Both will be left over

The correct option is B

Explanation:

From the question we are told that

The mass of calcium hydride present is $m_h = 24.6 \ g$

The mass of water is $m_w = 14.0 \ g$

Generally the molar mass of calcium hydride is $Z_h = 42 \ g/mol$

The molar mass of water is $Z_w = 18 \ g / mol$

The reaction between water and calcium hydride can be represented as a balanced chemical equation as follows

$CaH_2 + 2 H_2O \to Ca(OH)_2 + 2H_2$

From this equation we see that

1 mole(42 g) of calcium hydride dries 2(2 * 18 g) moles of water

Then we can say that

if 42 grams of calcium hydride dries (2 * 18 )g of water

24.6 grams will dry z grams of water

=> $z = \frac{24.6 * 2 *18}{42}$

=> $z = 21.1 \ g$ of water

Given that the amount of water the 24.6g of calcium hydride is capable of drying is greater than the amount of water present then the it means that after drying the water available that the calcium hydride will remain

Answer from: Quest

There is one s orbital, and there are three p orbitals, five d orbitals, and seven f orbitals. thus, the answer is b. do not confuse the number of orbitals in a subshell with the number of electrons the subshell can hold. each orbital can hold two electrons, so the capacity of an nf subshell is 14 electrons.

Answer from: Quest

Carbon based or cells?

Another question on Chemistry

Chemistry, 22.06.2019 02:40

The difference between the atomic number of an element and the element’s atomic mass is the number of ions.

Answers: 3

Answer

Chemistry, 22.06.2019 05:40

Salicylic acid is a very important acid. it is used to synthesize the aspirin by treating with acetic anhydride. a 0.2015-g sample of salicylic acid was dissolved in a 100.00-ml volumetric flask, and the solution was diluted to the mark. a 10-ml aliquot of this solution was titrated with standard naoh (0.01130 + 0.2% n) to a phenolphthalein faint pink color end point at 19.81 ml. (a) (calculate the normality of the salicylic acid solution used in the titration. (b) assuming the salicylic acid is pure, what is the equivalent weight of the salicylic acid? practice problems for the final exam (continued) (c) (calculate the inherent error in the determination of the equivalent weight you calculated in part (b). use the following absolute errors in the equipment /glassware when calculating the inherent error. 5.00-ml pipet: + 0.02 ml 100-ml volumetric flask: + 0.08 ml analytical balance: + 0.2 mg 25-ml buret: + 0.03 ml

Answers: 2

Answer

Chemistry, 22.06.2019 12:10

|using the periodic tablewarm-upuse the periodic table in the tools bar to answer the following questions.what elemental classification does oxygen belongto? done

Answers: 3

Answer

Chemistry, 22.06.2019 18:30

How many moles of bromine are needed to produce 3.23 moles of potassium bromide

Answers: 1

Answer

You know the right answer?

A common issue in organic chemistry processes is trace contamination. Organic solvents can become co...

Questions