Chemistry, 02.12.2020 19:40 gabestrickland2

Ch 8 Test Circle the best answer to each question

The temperature of a roast is checked to see if it has met its critical limit of 145 F. for 4 min. This is an example of which HACCP principle?
Verification
Monitoring
Record keeping
Hazard analysis

2. The temperature of a pot of beef stew is checked during holding. The stew has not met the critical limit and is thrown out according to house policy. Throwing out the stew is an example of which HACCP principle?
Monitoring
Verification
Hazard analysis
Corrective action

3. The deli serves cold sandwiches in a self serve display. Which step in the flow of food would be a critical control point?
Storage
Cooling
Cooking
Reheating

4. What is the first step in developing a HACCP plan?
Identify corrective actions
Conduct a hazard analysis.
Establish monitoring procedures.
Determine critical control points

5. What is the purpose of a food safety management system?
Keep all areas of the facility clean and pest free
Identify, tag, and repair faulty equipment within the facility
Identify and control possible hazards throughout the fowo of food
Document and use the correct methods of purchasing and receiving food

6. Reviewing Temperature logs and other records to make sure that the HACCP plan is working as intended is an example of which HACCP principle?
Monitoring
Verification
Hazard Analysis
Record Keeping

7. A Chef sanitized a thermometer probe and then checked the temperature of minestrone soup being held in a hot holding unit. The temperature was 120 F., which did not meet the operations critical limit of 135 F. The chef recorded the temperature in the log and reheated the soup to 165 F. for 15 sec. Which was the corrective action?
Reheating the soup
Checking the critical limit
Sanitizing the thermometer probe
Recording the temperature in the log

8. What does an operation that wants to smoke food as a method of preservation need to have before processing food this way?
Food Safety certificate
Crisis management plan
Master cleaning schedule
Variance from the local regulatory authority

Answers: 2

Show answers

Another question on Chemistry

Chemistry, 22.06.2019 01:30

Follow the steps provided in the simulation to add water to the graduated cylinder, select one of the three samples (copper, silver, or gold), set its mass to the values given in the statements below, and calculate its density. here is a summary of the steps required: add water by clicking and holding prepare a known volume of water button. until the desired volume of water has been added. if more than the desired volume is added, click the reset button. button and redo the procedure. a single click will add about 21.0 ml of water. to set the mass, click and hold weigh out metal button. until the desired amount of metal is added to the weighing pan. once the desired mass of the metal is added, release the button. transfer the metal to water and then click on calculate density button. to see how the density is calculated using water displacement to measure the volume of the solid. to save time you can approximate the initial volume of water to â±1 ml and the initial mass of the solid to â±1 g. for example, if you are asked to add 23 ml of water, add between 22 ml and 24 ml. which metals in each of the following sets will have equal density? check all that apply.

Answers: 1

Answer

Chemistry, 22.06.2019 15:30

How many moles are in 43.9 l of oxygen

Answers: 1

Answer

Chemistry, 22.06.2019 15:30

The reactions of photosynthesis occur in the of plant cell? a.mitochondria. b. lysosomes. c. chloroplasts. d. chlorophyll

Answers: 1

Answer

Chemistry, 22.06.2019 16:30

Which metals are called noble metals