Chemistry, 04.12.2020 17:20 ummmmmmmmmmmm

65.5 g copper reacts with g oxygen to produce 81 g copper (I) oxide.

Answers: 3

Show answers

Answers

Answer from: Quest

a mercury barometer is a device that uses the physical properties of mercury in a tube to measure barometric pressure. mercury barometers are used for : -

1. measurement of atmospheric pressure

2. determining the altitude of a place

3. weather forecasting

4. calibration and checking of aneroid barometers

5. application in fluid mechanics

6. measurement of pressure in aircrafts

7. surface weather analysis

8. preparation of barographs

9. usage in physical sciences like physics, astronomy & chemistry

10. preparation of aircraft altimeters

characteristics of mercury barometer : -

1.used to define and measure atmospheric pressure.

2.on the average at sea level the column of mercury rises to a height of about 760 mm.

3.this quantity is equal to 1 atmosphere.

4.it is also known as standard atmospheric pressure.

5.a barometer in which the weight of a column of mercury in a glass tube with a sealed top is balanced against that of the atmosphere pressing on an exposed cistern of mercury at the base of the mercury column, the height of the column varying with atmospheric pressure.

Write 15 uses of a mercury barometer along with its characterestics

Answer from: Quest

the answer is b. dilution

Answer from: Quest

Particle exchange energy though elastic collision , hope this .

Answer from: Quest

Answerthis solution will not form a precipitateexplanationsolubility equilbrium: pbf₂(s) ⇄ pb²⁺(aq) + 2 f⁻(aq)the solubility product expression is $k_{sp} = [\text{pb}^{2+}][\text{f}^- ]^2 = 4 \times 10^{-8}$ (we exclude solids from the equilibrium expression).now suppose we have the trial ion product q, which we can define as $q = [\text{pb}^{2+}]_{\text{initial}} \cdot [\text{f}^- ]^2_{\text{initial}}$ then, we can interpret q as the product of the concentration of the ions that we have and ksp as the product of the ion concentrations that are needed to form a saturated solution.if q > ksp, then that implies that there will be a surplus of ions that exceed the amount that is required to form a saturated solution. a precipitate will then form (the precipitate continually forms until the surplus ions are removed and q is decreased to ksp's value).if q = ksp, the saturated solution that forms is barely saturated and the precipitate will be minimal.if q < ksp, then the ion concentration will not be enough to form a saturated solution (so no precipitate).using our information, we calculate the trial ion product: $\begin{aligned} q & = [\text{pb}^{2+}]_{\text{initial}} \cdot [\text{f}^- ]^2_{\text{initial}} \\ & = (1.9 \times 10^{-3} ) (3.8\times 10^{3})^2 \\ & = 2.7 \times 10^{-8} \end{aligned}$ since q = 2.7 × 10⁻⁸ < ksp = 4 × 10⁻⁸, a precipitate will not form.

Another question on Chemistry

Chemistry, 22.06.2019 06:30

Design techniques and materials that reduce the negative environmental impact of a structure are referred to as

Answers: 2

Answer

Chemistry, 22.06.2019 10:30

Asample of air with a volume of 2.20m3 at a pressure of 105 kpa and a temperature of 30c is cooled to 10c and the pressure is reduced to 75.0 kpa. what is the new volume? 6.9 1.34 2.56 43.0 2.88

Answers: 1

Answer

Chemistry, 22.06.2019 12:00

What term is applied to a scientist who studies ancient life, including animal and plant fossils a. anthropologist b. dendroclimatologist c. geophysicist d. paleontologist

Answers: 2

Answer

Chemistry, 22.06.2019 20:00

In vapor-liquid equilibrium in a binary mixture, both components are generally present in both phases. how many degrees of freedom are there for such a system? the reaction between nitrogen and hydrogen to form ammonia occurs in the gas phase. how many degrees of freedom are there for this system? steam and coal react at high temperatures to form hydrogen, carbon monoxide, carbon dioxide, and methane. the following reactions have been suggested as being involved in the chemical transformation:

Answers: 3

Answer

You know the right answer?

65.5 g copper reacts with g oxygen to produce 81 g copper (I) oxide....

Questions