Chemistry, 13.12.2020 23:10 rm3582317

Student carries out a titration to determine the concentration of a solution of nitric acid. She titrates the solution of nitric acid against a standard solution
of sodium hydroxide with a known concentration of 0.0998 mol/dm². She
finds that 21.80 cm of the nitric acid solution is needed to exactly neutralise
25.0 cm of the sodium hydroxide solution.
Calculate the concentration of the nitric acid solution. Give your answer to
three significant figures.
The equation for the neutralisation reaction is
HNO3 + NaOH → NaNO3 + H2O

Answers: 3

Show answers

Answers

Answer from: fazegaze89

The concentration of the nitric acid solution is 0.11445 mol/dm³

From the question,

We are to calculate the concentration of the nitric acid solution

The given balanced chemical equation for the reaction is

HNO₃ + NaOH → NaNO₃ + H₂O

This means 1 mole of HNO₃ is needed to completely neutralize 1 mole of NaOH

Using the formula

$\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}$

Where $C_{A}$ is the concentration of acid

$C_{B}$ is the concentration of base

$V_{A}$ is the volume of acid

$V_{B}$ is the volume of base

$n_{A}$ is the mole ratio of acid

$n_{B}$ is the mole ratio of base

From the given information

$C_{B}= 0.0998\ mol/dm^{3}$

$V_{A} = 21.80 \ cm^{3}$

$V_{B} = 25.0 \ cm^{3}$

From the balanced chemical equation

$n_{A} = 1$

$n_{B} =1$

Putting the parameters into the formula, we get

$\frac{C_{A} \times 21.80 }{0.0998 \times 25.0} = \frac{1}{1}$

Then,

$C_{A} \times 21.80=0.0998 \times 25.0$

∴ $C_{A}=\frac{0.0998 \times 25.0}{21.80}$

$C_{A} =\frac{2.495}{21.80}$

$C_{A} = 0.11445 \ mol/dm^{3}$

Hence, the concentration of the nitric acid solution is 0.11445 mol/dm³

Learn more here: link

Answer from: queenfan1818

The concentration of the Nitric acid solution : 0.114 M

Further explanation

Titration is a procedure for determining the concentration of a solution (analyte) by reacting with another solution whose known concentration (usually a standard solution) is called the titrant. Determination of the endpoint/equivalence point of the reaction can use indicators according to the appropriate pH range

Titrations can be acid-base titration, depositional titration, and redox titration. An acid-base titration is the principle of neutralization of acids and bases

Reaction

HNO₃ + NaOH → NaNO₃ + H₂O

Concentration a standard solution of sodium hydroxide : 0.0998 mol/dm³ , and the volume = 25 cm³

moles NaOH=

$\tt mol=M\times V\\\\mol=0.0998\times 25\\\\mol=2.495~mlmoles$

From the equation, mol ratio HNO₃ : NaOH = 1 : 1, so mol HNO₃ = mol NaOH=2.495 mlmoles

The volume of HNO₃ = 21.8 cm³, so the concentration :

$\tt M=\dfrac{n}{V}\\\\M=\dfrac{2.495}{21.8}\\\\M=0.114$

Answer from: Quest

possibly, yes.

explanation:

the amount of sugar you take in is dangerously high, risk of heart disease, high risk of diabetes, and etc.

Answer from: Quest

It changes food into energy that the organism can use.

Another question on Chemistry

Chemistry, 22.06.2019 00:10

Which of the following best describes the formation of plasma?

Answers: 1

Answer

Chemistry, 22.06.2019 08:00

Straightforward questions answered in the powerpoint slidesreaction: heating the starting materials under refluxwhat does it mean to heat under reflux? why do we choose water as the reflux solvent? what are boiling chips used for? why do we put a condenser on top of the reaction? why do we add heat and let the reaction stir for 30 minutes? why do we add sulfuric acid to the reaction after it cools as opposed to when it’s still hot? separation: filtration of precipitatewhy don’t we do an aqueous and organic extraction in the separatory funnel? why do you rinse the salicylic acid on the filter with ice cold water? purification: recrystallization of salicylic acid (no hot filtration needed)what is the difference in the amount of room temperature water vs. boiling water needed to dissolve the salicylic acid (assume a 1.2 gram yield of salicylic acid)? remember, in the lab if you need x ml of boiling water to dissolve a solid, then you should add a little more (definitely no more than 1.5 times the theoretical amount) to ensure it doesn’t recrystallize prematurely.analysis: melting point of salicylic acidwhat can you conclude if the melting point of the salicylic acid you just synthesized is 152-155oc and the 1: 1 mix of your product and “synthetic” salicylic acid is 151-154oc?

Answers: 1

Answer

Chemistry, 22.06.2019 15:00

20 pts ‼️ an unmanned spacecraft travels to mars. mars has a lower strength of gravity than earth. where in the image is the spacecraft’s weight the greatest?

Answers: 1

Answer

Chemistry, 22.06.2019 20:30

Citric acid has a ph between 1 and 3. it is considered to be aa. weak acidb. weak basec. strong based. strong acid

Answers: 2

Answer

You know the right answer?

Student carries out a titration to determine the concentration of a solution of nitric acid. She ti...

Questions