The raw water supply for a community contains 18 mg/L total particulate matter. It is to be treated by addition of 60 mg alum (Al2(SO4)3 14H2O) per liter of water treated. Essentially, all the added alum precipitates represented by the following reaction: Required:
a. For a total flow of 8000 m^3/d, compute the daily alum requirement and the concentration of solids in the water following alum addition, assuming the alum all precipitates as Al(OH)3(s).
b. The water is initially at pH 7.5 and has ALK=40 mg/L as CaCO3. It is desired to maintain solution pH at 6.5 or higher. Will the pH be in the acceptable range after the chemical addition and Al(OH)3(s) precipitation?
c. What will the pH be if the treated solution is bubbled with air, so that it reached equilibrium with atmospheric CO2?

Solution :

Given :

The steady state flow = 8000

The concentration of the particulate matter = 18 mg/L

Therefore, the total quantity of a particulate matter in fluid

If 60 mg of alum required for one litre of the water treatment.

So Alum required for  

or 480 kg/d

Therefore the alum required is 480 kg/d

1 mg of the alum gives 0.234 mg alum precipitation, so 60 mg of alum will give

      mg of alum ppt. per litre

480 kg of alum will give = 480 x 0.234 kg/d

                                        = 112.32 kg/d ppt of alum

Daily total solid load is  

                                       = 256.32 kg/d

So, the total concentration of the suspended solid after alum addition

= 32.04 mg/L

Therefore total alum requirement = 480 kg/d

b). Initial pH = 7.4

 The dissociation reaction of aluminium hydroxide as follows :

After addition, the aluminium hydroxide pH of water will increase due to increase in ions.

Therefore, the pH of water will be acceptable range after the addition of aluminium hydroxide.

c). The reaction of and water as follows :

For the atmospheric pressure :

And the pH is reduced into the range of 5.9 to 6.4

out of these options:

ability to burn paper

pure sodium reacting violently with water

the boiling point of water

helium does not tend to react with anything

i would say this is a physical property:

helium does not tend to react with anything

why? :

i said helium does not tend to react with anything because well, it reacts to ! but ability to burn paper, pure sodium reacting violently with water, & the boiling point of water are chemical or

physical properties: the properties of a substance that can be observed without changing the chemical makeup of the substance

chemical properties: properties of a substance relating to the chemical nature and reactivity of the substance

both adhesion and cohesion are attractions.

they are different in that adhesion is the force of attraction between the molecules of two different substances, whereas cohesion is the force of attraction between molecules of the same substance.

possible examples include capillary action, in which the adhesion between water and glass causes the water to rise in a narrow tube against the force of gravity.

because of hydrogen bonding, water is extremely cohesive.

this causes molecules on the surface of water to be drawn inward, which is why drops of water form beads on smooth surfaces.

hope this .