A mixture of 75 mole% methane and 25 mole% hydrogen is burned with 25% excess air. Fractional conversions of 90% of the methane and 85% of the hydrogen are achieved; of the methane that reacts, 95% reacts to form CO2 and the balance reacts to form CO. The hot combustion product gas passes through a boiler in which heat transferred from the gas converts boiler feedwater into steam. Required:
a. Calculate the concentration of CO (ppm) in the stack gas.
b. The CO in the stack gas is a pollutant. Its concentration can be decreased by increasing the percent excess air fed to the furnace. Think of at least two costs of doing so. (Hint: The heat released by the combustion goes into heating the combustion products; the higher the combustion product temperature, the more steam is produced.)

Solution :

Consider a mixture of methane and hydrogen.

Take the basis as 100 moles of the mixture.

The mixture contains 75% of methane and 25% of hydrogen by mole and it is burned with 25% in excess air.

Moles of methane = 0.75 x 100

Moles of hydrogen = 0.25 x 100

The chemical reactions involved during the reaction are :

The fractional conversion of methane is 90%

Number of moles of methane burned during the reaction is = 0.9 x 75

                                                                                                   = 67.5

Moles of methane leaving = initial moles of methane - moles of methane burned

                                           = 75 - 67.5

                                           = 7.5 moles

Fractional conversion of hydrogen is 85%

The number of moles of hydrogen burned during the reaction is = 0.85 x 25

                                                                                                   = 21.25

Moles of hydrogen leaving = initial moles of hydrogen - moles of hydrogen burned

                                           = 25 - 21.25

                                           = 3.75 moles

Methane undergoing complete combustion is 95%.

formed is = 0.95 x 67.5

                       = 64.125 moles

formed is = 0.05 x 67.5

                       = 3.375 moles

Oxygen required for the reaction is as follows :

From reaction 1, 1 mole of the methane requires 2 moles of oxygen for the complete combustion.

Hence, oxygen required is = 2 x 75

                                            = 150 moles

From reaction 3, 1 mole of the hydrogen requires 0.5 moles of oxygen for the complete combustion.

Hence, oxygen required is = 0.5 x 25

                                            = 12.5 moles

Therefore, total oxygen is = 150 + 12.5 = 162.5 moles

Air is 25% excess.

SO, total oxygen supply = 162.5 x 1.25 = 203.125 moles

Amount of nitrogen =

                                = 764.136 moles

Total oxygen consumed = oxygen consumed in reaction 1 + oxygen consumed in reaction 2 + oxygen consumed in reaction 3

Oxygen consumed in reaction 1 :

1 mole of methane requires 2 moles of oxygen for complete combustion

 = 2 x 64.125

 = 128.25 moles

1 mole of methane requires 1.5 moles of oxygen for partial combustion

= 1.5 x 3.375

= 5.0625 moles

From reaction 3, 1 mole of hydrogen requires 0.5 moles of oxygen

= 0.5 x 21.25

= 10.625 moles.

Total oxygen consumed = 128.25 + 5.0625 + 10.625

                                        = 143.9375 moles

Total amount of steam = amount of steam in reaction 1 + amount of steam in reaction 2 + amount of steam in reaction 3

Amount of steam in reaction 1 = 2 x 64.125 = 128.25 moles

Amount of steam in reaction 2 = 2 x 3.375 = 6.75 moles

Amount of steam in reaction 3  = 21.25 moles

Total amount of steam = 128.25 + 6.75 + 21.25

                                     = 156.25 moles

The composition of stack gases are as follows :

Number of moles of carbon dioxide = 64.125 moles

Number of moles of carbon dioxide = 3.375 moles

Number of moles of methane = 7.5 moles

Number of moles of steam = 156.25 moles

Number of moles of nitrogen = 764.136 moles

Number of moles of unused oxygen = 59.1875 moles

Number of moles of unused hydrogen = 3.75 moles

Total number of moles of stack  gas

= 64.125+3.375+7.5+156.25+764.136+59.1875+3.75

= 1058.32 moles

Concentration of carbon monoxide in the stack gases is

= 3189 ppm

b).  The amount of carbon monoxide in the stack gas can be decreased by increasing the amount of the excess air. As the amount of the excess air increases, the amount of the unused oxygen and nitrogen in the stack gases will increase and the concentration of CO will decrease in the stack gas.  

answer : a model is often used to explain and make things easier to understand when any scientific topic needs to be demonstrated and explained.

as in this case where a scientist wants to use a model to present the results of his detailed scientific investigation. he should do it as it will him to make the audience understand the concept in a much better way. also, it can be changed according to new scientific understandings.