Computers and Technology, 13.07.2019 05:00 amoore51

Apower supply unit for a computer converts:

Answers: 1

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 02:00

Which of the following is a way the operating system prevents unknown or unauthorized users from accessing the system?

Answers: 2

Answer

Computers and Technology, 22.06.2019 03:50

You are working as a security analyst in a company xyz that owns the whole subnet range of 23.0.0.0/8 and 192.168.0.0/8. while monitoring the data, you find a high number of outbound connections. you see that ip's owned by xyz (internal) and private ip's are communicating to a single public ip. therefore, the internal ip's are sending data to the public ip. after further analysis, you find out that this public ip is a blacklisted ip, and the internal communicating devices are compromised. what kind of attack does the above scenario depict?

Answers: 3

Answer

Computers and Technology, 22.06.2019 15:30

Why would a programmer use the logical operator and in an if statement? a: when an action is to be taken that requires both conditions to be falseb: when an action is to be taken that requires both conditions to be truec: when an action is to be taken that requires the first condition to be falsed: when an action is to be taken that requires the second condition to be truei took the test and the answer is b.

Answers: 3

Answer

Computers and Technology, 22.06.2019 23:50

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Answers: 3

Answer

You know the right answer?

Apower supply unit for a computer converts:...

Questions