What is wrong with the configuration below? r1# show controller s0/0/1 interface serial0/0/1 hardware is powerquicc mpc860 internet address is 192.168.2.1/24 dce v.35, no clock ! lines omitted for brevity r1# show running-config interface s0/0/1 building current configuration : 42 bytes ! interface serial0/0/1 ip address 192.168.2.1 255.255.255.0 end

Write a program that uses a random number generator to generate a two digit positive integer and allows the user to perform one or more of the following operations: a. double the number. b. reverse the digits of the number. c. raise the number to the power of 2, 3, or 4. d. sum the digits of the number. e. if the number is a two-digit number, then raise the first digit to the power of the second digit. f. if the number is a three-digit number and the last digit is less than or equal to 4, then raise the first two digits to the power of the last digit. after performing an operation if the number is less than 10, add 10 to the number. also, after each operation determine if the number is prime. each successive operation should be performed on the number generated by the last operation. your program should not contain any global variables and each of these operations must be implemented by a separate function. also, your program should be menu driven. 7. (fraction calculator) write a program that

From excel to powerpoint, you can copy and paste a. cell ranges and charts, one at a time. b. cell ranges and charts, simultaneously. c. charts only. d. cell ranges only.

Which finger presses the h key on the keyboard? index finger on the left hand pinky finger on the right hand index finger on the right hand thumb on the left hand