Describeat least three applications where re-writeable optical laser diskwould be preferred over hard disks for storage

Data is processed, stored, and transmitted as a series of 1s and 0s. each 1 or 0 is called a(n) . a series of eight 0s and 1s, called a(n) , represents one character—a letter, number, or punctuation mark. data becomes when it is presented in a format that people can understand and use. digital signals are represented by two different , such as +5 volts and +.2 volts. digital data can also take the form of light and dark spots etched onto the surface of a cd or the positive and negative orientation of particles on the surface of a hard disk. data consists of numbers that might be used in arithmetic operations. it can be represented digitally using the number system. data is composed of letters, symbols, and numerals that are not used in arithmetic operations. computers represent this type of data using , ebcdic, unicode, or utf-8. data is quantified using terms such as or kibibyte (1024 bytes), and prefixes such as or mebi (1,048,576), and giga or (1,073,741,824). to reduce file size and transmission times, digital data can be compressed. compression provides the means to compress data and reconstitute it into its original state. compression throws away some of the original data during the compression process. compressed files usually have at the end of the file name and are represented with special icons. these files have to be or unzipped before you can view the data they contain.

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

In which job role will you be creating e-papers, newsletters and preiodicals