What is wrong with the configuration below? r1# show controller s0/0/1 interface serial0/0/1 hardware is powerquicc mpc860 internet address is 192.168.2.1/24 dce v.35, no clock ! lines omitted for brevity r1# show running-config interface s0/0/1 building current configuration : 42 bytes ! interface serial0/0/1 ip address 192.168.2.1 255.255.255.0 end

You will be given two character arrays of the same size, one will contain a number of ships. ships will move around the character array based on which way they are facing and the route they are on. routes are given in the other array. the route consists of '-' and '|' for straight paths, '\' and '/' for curves, and '+' for intersections. there are ships on these routes. ships always face a direction, '^' for up, '> ' for right, 'v' for down, and '< ' for left. any time the ships hit a '\' or a '/' it will turn as you would expect a ship to turn (e.g. a '^' that moves into a '/' will turn right). at an intersection, ships will always continue straight through. all ships move at the same speed, ships take turns moving and all ships move during one 'tick'. the one in the most top left goes first, followed by those to its right, then the ones in the next row. it iterates along the rows and then down the columns. each ship moves one space on its turn moving along the route. your function needs to return the position of the first collision between two ships and the number of ticks before the crash occurred.

Dameas communication challenge is due to which factor

Who can provide you with a new password when you have forgotten your old one? your provide you with a new password in case you forget your old one.