A) determine the nyquist rate for each signal
b) what must be the speed of the commutator (in samples per second)?
c) if the commutator output is quantized with l=1024 and the result is binary-coded. what is the output bit rate?
d) determine the minimum transmission bandwidth of the channel.

Alocal reaction will occur at the site of the exposure such as irritation or damage to the skin eye or local reaction will occur at the site of the exposure such as irritation or damage to the skin ireland lounges

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

What shows the web address of the page that is currently displayed in the workspace? status window toolbar location bar internet box