Tasks1. jesse wants to see a structure chart. she said to use program modules based on theprocesses we identified earlier. she wants the modules to be cohesive and loosely coupled.2. need a testing plan that includes unit integration and system testing as jesse requested. also, need a reminder about careful documentation.3. jesse says it's important to understand the difference between the test and operationalenvironments, and she wants me to draft a message that explains the installation processand includes guidelines for all concerned. also need to develop a training plan for tims, with groups that should receive training, the topics that should be covered, and trainingmethods we might use.4. jesse wants me to recommend a data conversion plan and a changeover method fortims. she also wants a plan for post-implementation review, including fact-gatheringmethods, topics to cover, the timing of the review, and who should perform it.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

What is the primary difference between the header section of a document and the body? a. the body is displayed on the webpage and the header is not. b. the header is displayed on the webpage and the body is not. c. the tag for the body is self-closing, but the tags for the headers must be closed. d. the tag for the header is self closing, but the tag for the body must be closed.

An environmental protection agency study of 12 automobiles revealed a correlation of 0.47 between engine size and emissions. at 0.01 significance level, can we conclude that there is a positive association between the variables? what is the p value? interpret.