subject

Your supervisor has asked you to set up a raid hard drive array in a tower system, which has a motherboard that uses the b360 chipset. you have installed the required three matching hard drives to hold the array. when you enter bios/uefi to configure the raid, you cannot find the menus for the raid configuration. what is most likely the problem?

a. a raid array requires at least four matching hard drives.

b. raid arrays are not configured in bios/uefi.

c. your supervisor did not give you the necessary access to bios/uefi to configure raid.

d. the b360 chipset does not support raid.

ansver
Answers: 3

Another question on Computers and Technology

question
Computers and Technology, 22.06.2019 17:30
1. before plugging in a new device to a computer you should unplug all other devices turn off the computer turn on the computer 2. many of the maintenance tools for a computer can be found in the control panel under administrative tools display personalization
Answers: 1
question
Computers and Technology, 23.06.2019 06:30
To become an audio technician, the most successful tactics might include the following. (select all that apply). learning how to persuade other people gaining different types of experience in audio technology learning as much as possible about art history establishing a reputation as a reliable professional
Answers: 1
question
Computers and Technology, 23.06.2019 09:30
Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e.g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)
Answers: 3
question
Computers and Technology, 24.06.2019 13:30
What process should be followed while giving a reference? sam has given a reference of his previous manager in his resume. sam should him in advance that the potential employers will him.
Answers: 1
You know the right answer?
Your supervisor has asked you to set up a raid hard drive array in a tower system, which has a mothe...
Questions
question
Biology, 10.09.2020 03:01
Questions on the website: 13722367