It has instance variables nfaces (int) and sidelength (double) it has getters, getnfaces() and getsidelength() it has a constructor that takes an int holding the number of faces and the side length. after input validation, it sets the instance variables. it has an abstract method, getvolume() that returns a float. a tostring() method that returns a string containing the number of faces and the side length. it can have other methods and/or instance variables if you deem them necessary.

Given int variables k and total that have already been declared, use a while loop to compute the sum of the squares of the first 50 counting numbers, and store this value in total. thus your code should put 11 + 22 + 33 + + 4949 + 50*50 into total. use no variables other than k and total.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Each time you save a document, you will need to type in the file type in which it should be saved you can select the save button to save it with the same file name if it has been previously saved you will need to select the location to save the file you will need to use the save as dialog box