Over the past three hours the pressure has been steadily increasing at a rate of what

Answer the following questions regarding your system by using the commands listed in this chapter. for each question, write the command you used to obtain the answer. a. what are the total number of inodes in the root filesystem? how many are currently utilized? how many are available for use? b. what filesystems are currently mounted on your system? c. what filesystems are available to be mounted on your system? d. what filesystems will be automatically mounted at boot time?

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Is a type of bullying that takes place when a person intentionally posts negative information about another that is not true