Is this photo considered rim photography

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Use a physical stopwatch to record the length of time it takes to run the program. calculate the difference obtained by calls to the method system.currenttimemillis() just before the start of the algorithm and just after the end of the algorithm. calculate the difference obtained by calls to the method system.currenttimemillis() at the start of the program and at the end of the program so that the elapsed time includes the display of the result. use the value returned by the method system.currenttimemillis() just after the end of the algorithm as the elapsed time.

Write a defining table and then a program that determines if you can sleep in or not. your program should get all its input from your computer’s clock. on all weekdays (monday through friday) that are not holidays, your program should output “get up! ” on all other days (weekends and holidays), your program should output “sleep in.” the three holidays that your program must check for are january 1 (new year’s day), july 4 (u.s. independence day), and december 25 (christmas). you don’t need to include other holidays in your program because most other holidays do not occur on a fixed day each year.