The CorpDC3 server is a domain controller in the CorpNet domain. The server holds an Active Directory-integrated zone for the CorpNet domain. You need to secure zone data and prevent anyone from copying zone data from the CorpDC3 server through zone transfer. Because all zone information is replicated automatically through Active Directory replication, you know you can disable zone transfers while still replicating data with other domain controllers. In this lab, your task is to disable zone transfers for the CorpNet zone.

The most common battery cable terminal is a that provides a large surface contact area with the ability to tighten the terminal onto the battery post using a nut and bolt.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

The computers in the sales department did not have enough data storage capacity to contain all the information the department needed to store, and it was taking a long time for team members to access the data they needed. to fix the problem, the technician installed new, larger hard drives on all the computers.