A technician selected the GUI interface on a wireless router and added a DNS address of 208.67.220.220. The technician then immediately exited the GUI interface. What will occur as a result of this configuration?

A. All connected host devices, configured with DHCP, will automatically be sent the IP address of the DNS server.
B. The DNS server address will not be sent to connected devices since the technician forgot to save the configuration.
C. The technician should have used the Config tab to enter the DNS address.
D. The technician should check the Physical tab to ensure that the wireless router is powered on.

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

The kurt vonnegut commencement speech, the neiman-marcus chocolate chip cookie recipe, and the get-well emails to the dying boy are examples of select one: a. social engineering b. hoax emails c. email viruses d. worms

Write a new lc-3 trap subroutine (i.e. a subroutine that will be invoked via the trap instruction) that will receive a numeric digit entered at the keyboard (i.e. an ascii character), echo it to the screen, and return in r0 the corresponding numeric value: so if the user types the digit '7', the character '7' will appear on the screen, but the value returned in r0 will be b0000 0000 0000 0111 (#7) you may not use any trap calls in your code - you must implement the "polling" code that interrogates the keyboard status and data registers. ; getnum_tsr ; a subroutine for obtaining a numeric value ; given ascii numeric digit input to keyboard. ; the numeric digit is echoed to the console (e.g. '7' = b0000 0000 0011 0111), ; but the value returned in r0 is the actual numeric value ; corresponding to the digit (e.g. b0000 0000 0000 0111 =