CSM Tech Publishing has four buildings connected by fiber-optic cabling and 12 subnets connected by several routers running RIPv2. One building has flooded, so employees and their equipment have moved to a temporary building on the same site. A router with three interfaces in the flooded building was also damaged. There are no spare routers, and the router can't be replaced for several days. Five servers running Windows Server 2016 have been moved to the temporary building. One of these servers is available as a spare or for other purposes. What can you do to solve your routing problem? Be specific about how you would carry out your solution, and state whether you would use static or dynamic routing.

Write a new lc-3 trap subroutine (i.e. a subroutine that will be invoked via the trap instruction) that will receive a numeric digit entered at the keyboard (i.e. an ascii character), echo it to the screen, and return in r0 the corresponding numeric value: so if the user types the digit '7', the character '7' will appear on the screen, but the value returned in r0 will be b0000 0000 0000 0111 (#7) you may not use any trap calls in your code - you must implement the "polling" code that interrogates the keyboard status and data registers. ; getnum_tsr ; a subroutine for obtaining a numeric value ; given ascii numeric digit input to keyboard. ; the numeric digit is echoed to the console (e.g. '7' = b0000 0000 0011 0111), ; but the value returned in r0 is the actual numeric value ; corresponding to the digit (e.g. b0000 0000 0000 0111 =