Show the stack with all activation record instances, including static and
dynamic chains, when execution reaches position 1 in the following skeletal
program. Assume Bigsub is at level 1.
procedure Bigsub is
MySum : Float;
procedure A is
X : Integer;
procedure B(Sum : Float) is
Y, Z : Float;
begin -- of B
. . .
C(Z)
. . .
end; -- of B
begin -- of A
. . .
B(X);
. . .
end; -- of A
procedure C(Plums : Float) is
begin -- of C
. . . <1
end; -- of C
L : Float;
begin -- of Bigsub
. . .
A;
. . .
end; -- of Bigsub

Now you’re on your own. include a short summary of this section with plots in your lab report. write a matlab script file to do steps (a) through (d) below. include a listing of the script file with your report. 1 the soundsc(xx,fs) function requires two arguments: the first one (xx) contains the vector of data to be played, the second argument (fs) is the sampling rate for playing the samples. in addition, soundsc(xx,fs) does automatic scaling and then calls sound(xx,fs) to actually play the signal. mcclellan, schafer, and yoder, dsp first, 2e, isbn 0-13-065562-7. prentice hall, upper saddle river, nj 07458. c 2015 pearson education, inc. 4 mcclellan, schafer and yoder, signal processing first. prentice hall, upper saddle river, new jersey, 2003. c 2003 prentice hall. (a) generate a time vector (tt) to cover a range of t that will exhibit approximately two cycles of the 4000 hz sinusoids defined in the next part, part (b). use a definition for tt similar to part 2.2(d). if we use t to denote the period of the sinusoids, define the starting time of the vector tt to be equal to t , and the ending time as ct . then the two cycles will include t d 0. finally, make sure that you have at least 25 samples per period of the sinusoidal wave. in other words, when you use the colon operator to define the time vector, make the increment small enough to generate 25 samples per period. (b) generate two 4000 hz sinusoids with arbitrary amplitude and time-shift. x1.t / d a1 cos.2

5.a fishing rod is formed from a composite material of 0.5 kg of glass fibers embedded in a matrix of 0.5 kg of epoxy resin. the glass fibers are assumed to be long, continuous and unidirectional. to achieve a greater stiffness it is proposed to use a different composite that is comprised of long continuous carbon fibers that will be embedded in a matrix of 0.5 kg of epoxy resin. if the modulus of elasticity of the carbon fiber composite is 10% greater than the elastic modulus of the glass fiber composite, estimate the mass of carbon fibers that will be used to make the carbon fiber composite. assume the applied tensile stress is parallel to the direction of the long axis of the fibers. the epoxy resin, glass fiber, and carbon fiber have an elastic modulus of 5, 86, and 350 gpa respectively and a density of 1100, 2500, and 1800 respectively.

To remove text from a specific location and keep it to use again, you should select