In an e-mail message, what do the initials bcc mean?

You will be given two character arrays of the same size, one will contain a number of ships. ships will move around the character array based on which way they are facing and the route they are on. routes are given in the other array. the route consists of '-' and '|' for straight paths, '\' and '/' for curves, and '+' for intersections. there are ships on these routes. ships always face a direction, '^' for up, '> ' for right, 'v' for down, and '< ' for left. any time the ships hit a '\' or a '/' it will turn as you would expect a ship to turn (e.g. a '^' that moves into a '/' will turn right). at an intersection, ships will always continue straight through. all ships move at the same speed, ships take turns moving and all ships move during one 'tick'. the one in the most top left goes first, followed by those to its right, then the ones in the next row. it iterates along the rows and then down the columns. each ship moves one space on its turn moving along the route. your function needs to return the position of the first collision between two ships and the number of ticks before the crash occurred.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Let r be a robotic arm with a fixed base and seven links. the last joint of r is a prismatic joint, the other ones are revolute joints. give a set of parameters that determines a placement of r. what is the dimension of the configuration space resulting from your choice of parameters?