Discuss three questions you will probably use when first meeting with clients to find out about their goals.

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

The place where the extended axis of the earth would touch the celestial sphere is called the celestial

Install and use wireshark program ( send back screen shots and other vital information) case project 3-2: decode a tcp segment in a wireshark capture in this chapter, you walked through tcp segment to interpret the data included in its header. in this project, you use wireshark to capture your own http messafes, examine the tcp headers, and practice interpreting the data you'll find there. 1. open wireshark and snap the window to one side of your screen. open a browser and snap that window to the other side of your screen so you can see both windows.