(TCO 4) Give the contents of Register A after the execution of the following instructions:

Data_1 EQU $12
Data_2 EQU %01010101
LDAA #Data_1
ADDA #Data_2

A) $12
B) $67
C) $55
D) $57

Which are steps taken to diagnose a computer problem? a) reproducing the problem and using error codes b) reproducing the problem and troubleshooting c) using error codes and troubleshooting d) using error codes and stepping functions

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Asecurity policy is a a. set of guidlines b. set of transmission protocols c. written document d. set of rules based on standards and guidelines