Suppose that a program's data and executable code require 1,024 bytes of memory. A new section of code must be added; it will be used with various values 70 times during the execution of a program. When implemented as a macro, the macro code requires 73 bytes of memory. When implemented as a procedure, the procedure code requires 132 bytes (including parameter-passing, etc.), and each procedure call requires 7 bytes. How many bytes of memory will the entire program require if the new code is added as a procedure? 1,646

Technician a says that a shop towel should never be used to clean around the flange area before replacing an automatic transmission filter. technician b says that a dimpled transmission fluid pan can be repaired. who is right

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

To check whether your writing is clear , you can