Computers and Technology, 12.08.2020 04:01 gluanete

Ned is trying to decide how he wants to connect the nodes on the network he created. What are the two options that he has? Select one:
a through physical nearness or a central server
b. through hard cabling or wireless radio waves
c. through ethernet cables or Bluetooth
d. through software programs or osmosis

Answers: 3

Show answers

Answers

Answer from: skent1423

What is Network Cabling?

Cable is the medium through which information usually moves from one network device to another. There are several types of cable which are commonly used with LANs. In some cases, a network will utilize only one type of cable, other networks will use a variety of cable types. The type of cable chosen for a network is related to the network's topology, protocol, and size. Understanding the characteristics of different types of cable and how they relate to other aspects of a network is necessary for the development of a successful network.

The following sections discuss the types of cables used in networks and other related topics.

Unshielded Twisted Pair (UTP) Cable

Shielded Twisted Pair (STP) Cable

Coaxial Cable

Fiber Optic Cable

Cable Installation Guides

Wireless LANs

Unshielded Twisted Pair (UTP) Cable

Twisted pair cabling comes in two varieties: shielded and unshielded. Unshielded twisted pair (UTP) is the most popular and is generally the best option for school networks (See fig. 1).

Fig.1. Unshielded twisted pair

The quality of UTP may vary from telephone-grade wire to extremely high-speed cable. The cable has four pairs of wires inside the jacket. Each pair is twisted with a different number of twists per inch to help eliminate interference from adjacent pairs and other electrical devices. The tighter the twisting, the higher the supported transmission rate and the greater the cost per foot. The EIA/TIA (Electronic Industry Association/Telecommunication Industry Association) has established standards of UTP and rated six categories of wire (additional categories are emerging).

Categories of Unshielded Twisted Pair

CategorySpeedUse

11 MbpsVoice Only (Telephone Wire)

24 MbpsLocalTalk & Telephone (Rarely used)

316 Mbps10BaseT Ethernet

420 MbpsToken Ring (Rarely used)

5100 Mbps (2 pair)100BaseT Ethernet

1000 Mbps (4 pair)Gigabit Ethernet

5e1,000 MbpsGigabit Ethernet

610,000 MbpsGigabit Ethernet

Unshielded Twisted Pair Connector

The standard connector for unshielded twisted pair cabling is an RJ-45 connector. This is a plastic connector that looks like a large telephone-style connector (See fig. 2). A slot allows the RJ-45 to be inserted only one way. RJ stands for Registered Jack, implying that the connector follows a standard borrowed from the telephone industry. This standard designates which wire goes with each pin inside the connector.

Explanation:

Answer from: Quest

what class is it and how much will you pay?

Answer from: Quest

What are the choices? then ill be able to . on normal circumstances id say try a catchier title and topic

Another question on Computers and Technology

Computers and Technology, 21.06.2019 17:20

The liang book has an example called which is a javafx application that reads the javabook database using a preparedstatement object. using it as a guide, create a similar application called findbooks. it will read a list of authors from the bookdb created in problem 1 and display them in a listview. if the user selects an author, it should display the author's book titles in a textarea.

Answers: 2

Answer

Computers and Technology, 22.06.2019 03:50

You are working as a security analyst in a company xyz that owns the whole subnet range of 23.0.0.0/8 and 192.168.0.0/8. while monitoring the data, you find a high number of outbound connections. you see that ip's owned by xyz (internal) and private ip's are communicating to a single public ip. therefore, the internal ip's are sending data to the public ip. after further analysis, you find out that this public ip is a blacklisted ip, and the internal communicating devices are compromised. what kind of attack does the above scenario depict?

Answers: 3

Answer

Computers and Technology, 23.06.2019 14:30

Select the correct answer. andy received a potentially infected email that was advertising products. andy is at risk of which type of security threat? a. spoofing b. sniffing c. spamming d. phishing e. typo-squatting

Answers: 2

Answer

Computers and Technology, 24.06.2019 04:10

Write a program that reads a set of floating-point values. ask the user to enter the values, then print • the average of the values. • the smallest of the values. • the largest of the values. • the range, that is the difference between the smallest and largest. of course, you may only prompt for the values once.

Answers: 3

Answer

You know the right answer?

Ned is trying to decide how he wants to connect the nodes on the network he created. What are the tw...

Questions