Computers and Technology, 20.09.2020 17:01 orose6395

Here are some instructions in English. Translate each of them into the Simple Machine language. a. LOAD register 3 with the hex value 56.
b. ROTATE register 5 three bits to the right.
c. JUMP to the instruction at location F3 if the contents of register 7 are equal to the contents of register 0.
d. AND the contents of register A with the contents of register 5 and leave the result in register 0.

Answers: 2

Show answers

Answers

Answer from: mdlnlcs

a. LOAD register 3 with the hex value 56

2356

b. ROTATE register 5 three bits to the right.

A503

c. JUMP to the instruction at location F3 if the contents of register 7 are equal to the contents of register 0

B7F3

d. AND the contents of register A with the contents of register 5 and leave the result in register 0

80A5

Explanation:

To translate the English instructions to Machine language we have to consider Appendix C of A Simple Machine Language sheet.

a. LOAD register 3 with the hex value 56

The OP code for LOAD is:

Operand is:

RXY

Description is:

LOAD the register R with the bit pattern XY.

In a.

3 represents R

56 represents XY

Now following this we can join OP and Operand together to translate a.

2356

b. ROTATE register 5 three bits to the right

The OP code for ROTATE is:

Operand is:

R0X

Description is:

ROTATE the bit pattern in register R one bit to the right X times. Each time place the bit that started at the low-order end at the high-order end

In b.

5 represents R

three represents X

Now following this we can join OP and Operand together to translate b.

A503

c. JUMP to the instruction at location F3 if the contents of register 7 are equal to the contents of register 0.

The OP code for JUMP is:

Operand is:

RXY

Description is:

JUMP to the instruction located in the memory cell at address XY if the bit pattern in register R is equal to the bit pattern in register number 0.

In c.

7 represents R register

F3 represents XY

Now following this we can join OP and Operand together to translate c.

B7F3

d. AND the contents of register A with the contents of register 5 and leave the result in register 0.

The OP code for AND is:

Operand is:

RST

Description is:

AND the bit patterns in registers S and T and place the result in register R

In d.

A represents register S

5 represents register T

0 represents register R

Now following this we can join OP and Operand together to translate d.

80A5

Answer from: Quest

it on google i find it on there

Answer from: Quest

movie ripoff

Another question on Computers and Technology

Computers and Technology, 22.06.2019 12:10

Linux is distributed under gnu gpl. why is this important? a. it ensures that only torvalds can profit from the sale of linux b. it prevents unknowledgeable users from downloading programs they don't know how to operate. c. it provides protection for the developers who created linux. d. it states that anyone can copy, modify, and share the program if changes are made public.

Answers: 1

Answer

Computers and Technology, 23.06.2019 10:00

Whats three fourths of 15(this is supposed to be in math but i clicked too fast)

Answers: 1

Answer

Computers and Technology, 23.06.2019 15:30

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

Answer

Computers and Technology, 23.06.2019 18:30

Write a program that prints the day number of the year, given the date in the form month-day-year. for example, if the input is 1-1-2006, the day number is 1; if the input is 12-25-2006, the day number is 359. the program should check for a leap year. a year is a leap year if it is divisible by 4, but not divisible by 100. for example, 1992 and 2008 are divisible by 4, but not by 100. a year that is divisible by 100 is a leap year if it is also divisible by 400. for example, 1600 and 2000 are divisible by 400. however, 1800 is not a leap year because 1800 is not divisible by 400.

Answers: 3

Answer

You know the right answer?

Here are some instructions in English. Translate each of them into the Simple Machine language. a....

Questions