Ashley has included a bar graph in a term paper she’s authoring using a word processor. To make sure that the graph is not cut off when printed, she decides that the page with the graph should be printed horizontally. What should Ashley do? A.
change the paper size of the page on which the graph is included
B.
set landscape orientation for the page on which the graph is included
C.
decrease the margins of the page on which the graph is included
D.
zoom out of the page on which the graph is included

When keyboarding, if you want to be fast and accurate you should return your hands on home row with your fingers relaxed and your eyes on the text use only your index fingers to hunt and peck keep your fingers stiff and your eyes on the keys slouch in your chair and keep your fingers hovering over all of the keys

Problems: 1. using textbooks, reference books, and internet as your source of research, draw the following microprocessor microarchitectures i. intel 8086 ii. motorola 68000 i atmel atmega32 iv. mips single cycle v. arm cortex-m3 write an hdl module for a hexadecimal seven-segment display decoder. the input is 4-bit binary representing a hex number (0-f), and the output is 8-bit seven segment display bits (a-h). thus, the decoder must handle the digits 10 - 15 to display a-f respectively, in addition to 0-9 numbers. 2. design a 4-bit left and right rotator (both outputs). first sketch schematic diagrams of your design. then implement your design using hdl coding. 3. 4. design a modified priority encoder that receives an 8-bit input, a7: 0 and produces a 3-bit output, y2o. y indicates the most significant bit of the input that is true. y should be 0 if none of the inputs are true. give a simplified boolean equation, sketch a schematic, and write an hdl code. 5.write an 8: 1 multiplexer module called mux8 with selection inputs s, data input d, and data output y. data input (d) and data output (v) are 32-bit wide

Write a function so that the main program below can be replaced by the simpler code that calls function original main program: miles_per_hour = float( minutes_traveled = float( hours_traveled = minutes_traveled / 60.0 miles_traveled = hours_traveled * miles_per_hour print('miles: %f' % miles_traveled) sample output with inputs: 70.0 100.0 miles: 116.666667