Use the drop-down menus to complete the steps for inserting a range of cells into a worksheet. Click the first cell to select, and drag to the last cell to select.
Click thetab.
In the group, click
Specify whether to shift cells or insert an entire row or column, and click OK.

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

This technology is used to produce high-quality documents that look good on the computer screen and in print. wiki presentation paint desktop publishing

Consider a byte-addressable computer with 16mb of main memory, a cache capable of storing a total of 64kb of data and block size of 32 bytes. (a) how many bits in the memory address? (b) how many blocks are in the cache? (c) specify the format of the memory address, including names and sizes, when the cache is: 1. direct-mapped 2. 4-way set associative 3. fully associative