Computers and Technology, 21.10.2020 14:01 mike2910

Ajutor va rog mult la Mecanica acum!

Answers: 2

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 16:20

It policy compliance and emerging technologies respond to the following: propose at least three control measures that organizations need to put in place to ensure that they remain complaint with emerging technologies and in a continually changing it environment. examine the correlation of effective configuration management and change control procedures to remain compliant with emerging technologies and it security changes.

Answers: 2

Answer

Computers and Technology, 23.06.2019 13:50

Explain how email technologies enable the exchange of messages between users. find out the typical parts of an email address and explain each part.

Answers: 1

Answer

Computers and Technology, 23.06.2019 15:30

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

Answer

Computers and Technology, 23.06.2019 18:30

Write a program that prints the day number of the year, given the date in the form month-day-year. for example, if the input is 1-1-2006, the day number is 1; if the input is 12-25-2006, the day number is 359. the program should check for a leap year. a year is a leap year if it is divisible by 4, but not divisible by 100. for example, 1992 and 2008 are divisible by 4, but not by 100. a year that is divisible by 100 is a leap year if it is also divisible by 400. for example, 1600 and 2000 are divisible by 400. however, 1800 is not a leap year because 1800 is not divisible by 400.

Answers: 3

Answer

You know the right answer?

Ajutor va rog mult la Mecanica acum!
...

Questions