Computers and Technology, 28.10.2020 19:40 iana00000

What are the steps for subtotaling data? Select
.

Click the
tab.

In the Outline group, click Subtotal.

In the Subtotal dialog box, choose when to subtotal and what type of subtotaling to do.

After selecting the settings, click OK.

Answers: 3

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 21:30

After you clean an engine with hot water spray, it seems to stall; when it doesn't stall, it's idling noisily. technician a says to check for loose bolts on the flex plate near the torque converter. technician b says to wipe down the spark plug wires and the distributor cap. who is correct? a. technician a b. both technicians a and b c. technician b

Answers: 1

Answer

Computers and Technology, 23.06.2019 03:30

Many everyday occurrences can be represented as a binary bit. for example, a door is open or closed, the stove is on or off, and the fog is asleep or awake. could relationships be represented as a binary value? give example.

Answers: 1

Answer

Computers and Technology, 23.06.2019 13:30

Spoons are designed to be used for: spring hammering. applying body filler. identifying high and low spots. sanding highly formed areas.

Answers: 3

Answer

Computers and Technology, 23.06.2019 15:30

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Answers: 2

Answer

You know the right answer?

What are the steps for subtotaling data? Select
.

Click the
tab.

Questions