The importance of evaluating and maintaining a multimedia project?

Your program will make use of long long int variables for all calculations. note: the use of long long int requires that you have c++11 support. you should have this automatically if you are using a newer version of visual studio. the support is there for gcc as well, but you may need the -std=c++11 or -std=c++0x compiler flag. you first need to read in the total number of seconds. there is no prompt for the read (that is, you just do the cin without using a cout to display a prompt). this is going to seem a little strange when you are running your program in your ide

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

What percentage of teens plays video games? a.97% b.100% c.74% d.50%