Does Assembler directives execute at runtime?

You have inserted new slides based on a word outline. how do you format these new slides to match the powerpoint presentation formatting? a. select all slides in the presentation and click format on the home tab. b. select the new slides and click reset on the home tab. c. select all slides in the presentation and click reset on the home tab. d. select the new slides and click format on the home tab.

In a response of approximately 50 words, explain why it would be essential for the successful a/v technician to participate in additional coursework, presentations and seminars offered by equipment manufacturers as well as annual conferences attended by colleagues in the industry.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to