Serious answers only Write a program that asks the p34won to enter their grade, and then prints GRADE is a fun grade. Your program should repeat these steps until the user inputs I graduated.

Sample Run
What grade are you in?: (I graduated) 1st
1st is a fun grade.
What grade are you in?: (I graduated) 3rd
3rd is a fun grade.
What grade are you in?: (I graduated) 12th
12th is a fun grade.
What grade are you in?: (I graduated) I graduated

It's in python

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

What is wi-fi infrastructure? a metropolitan area network that uses radio signals to transmit and receive data a communications technology aimed at providing high-speed wireless data over metropolitan area networks a means by which portable devices can connect wirelessly to a local area network, using access points that send and receive data via radio waves includes the inner workings of a wi-fi service or utility, including the signal transmitters, towers, or poles and additional equipment required to send out a wi-fi signal

Each time you save a document, you will need to type in the file type in which it should be saved you can select the save button to save it with the same file name if it has been previously saved you will need to select the location to save the file you will need to use the save as dialog box