Computers and Technology, 06.11.2020 23:00 sanociahnoel

4.2 Code Practice: Question 2

Answers: 1

Show answers

Answers

Answer from: 1846252

4.2

Explanation:

Answer from: Quest

answer; i believe the correct answer is (b) by using a multimeter;

Answer from: Quest

Work with a monitor that’s calibrated and profiled. for critical image editing, calibration and profiling are essential. otherwise, the image you see on your monitor looks different on other monitors or when printed.plan to use adjustment layers to adjust the tonal range and color balance of your image. adjustment layers let you go back and make successive tonal adjustments without discarding or permanently modifying data from the image layer. keep in mind that using adjustment layers adds to the file size of the image and demands more ram from your computer. accessing the color and tonal commands in the adjustments panel automatically creates adjustment layers.if you don’t want to use adjustment layers, you can apply adjustments directly to an image layer. remember that some image information is discarded, when making a color or tonal adjustment directly to an image layer.for critical work and maximum preservation of image data, it’s best if the image you work with is 16 bits per channel (16‑bit image) rather than 8 bits per channel (8‑bit image). data is discarded when you make tonal and color adjustments. the loss of image information is more critical in an 8‑bit image than a 16‑bit image. generally, 16‑bit images have a larger file size than 8‑bit images.duplicate or make a copy of the image file. working on a copy of your image preserves the original in the event you want to use the image in its original state.remove any flaws such as dust spots, blemishes, and scratches from the image before making color and tonal adjustments.open the info or histogram panel in expanded view. as you evaluate and correct the image, both panels display invaluable feedback on your adjustments.you can make a selection or use a mask to confine your color and tonal adjustments to part of an image. another way to apply color and tonal adjustments selectively is to set up your document with image components on different layers. color and tonal adjustments are applied to only one layer at a time. only the image components on the targeted layer are affected.

Another question on Computers and Technology

Computers and Technology, 22.06.2019 16:00

You have inserted new slides based on a word outline. how do you format these new slides to match the powerpoint presentation formatting? a. select all slides in the presentation and click format on the home tab. b. select the new slides and click reset on the home tab. c. select all slides in the presentation and click reset on the home tab. d. select the new slides and click format on the home tab.

Answers: 3

Answer

Computers and Technology, 22.06.2019 16:50

Consider a slotted aloha system, where the time slot equals the fixed duration of each packet. assume that there are 4 stations a,b,c,d sharing the medium. (a) stations a,b,c,d receive one packet each from higher layers at times 1.3, 1.5, 2.6,5.7 respectively. show which transmissions take place when, according to the slottedaloha protocol; describe all transmissions until all four packets have been successful.when needed, each station has access to the following sequence of random number, provided by a random number generator and drawn uniformly between 0 and 1: (1) station a draws numbers: 0.31, 0.27, 0.78, 0.9, 0.9, 0.11, 0. (2) station b draws numbers: 0.45, 0.28, 0.11, 0.83, 0.37, 0.22, 0. (3)station c draws numbers: 0.1, 0.2, 0.3, 0.4, 0. (4) station d draws numbers: 0.36, 0.77, 0.9, 0.1, 0.1, 0.1, 0.1, 0. (b) in slotted aloha, a station transmits in each time slot with a given probability. what probabilities would you assign to each of the four stations so as to: (i) maximize the efficiency of the protocol? (ii) maximize fairness among the four stations? (c) will the efficiency increase or decrease if we modify slotted aloha as follows: (i) get rid of slots and allow stations to transmit immediately? (ii) implement carrier sensing? (iii) implement collision detection? (iv) implement collision avoidance?

Answers: 3

Answer

Computers and Technology, 23.06.2019 03:30

Many everyday occurrences can be represented as a binary bit. for example, a door is open or closed, the stove is on or off, and the fog is asleep or awake. could relationships be represented as a binary value? give example.

Answers: 1

Answer

Computers and Technology, 24.06.2019 21:40

Assume you need to test a function named inorder. the function inorder receives three int arguments and returns true if and only if the arguments are in non-decreasing order: that is, the second argument is not < the first and the third is not < the second. write the definition of driver function testinorder whose job it is to determine whether inorder is correct. so testinorder returns true if inorder is correct and returns false otherwise. for the purposes of this exercise, assume inorder is an expensive function call, so call it as few times as possible!

Answers: 1

Answer

You know the right answer?

4.2 Code Practice: Question 2...

Questions