Switched backbone networks:.a. always use a ring topology. b. require much more management that do routed backbone networks. c. use a star topology with one device, usually a switch. d. are the least common type of BN used in one building. e. switch the traffic based on layer 3 addresses.

What are listed in the vertical columns across the top of the event editor? a. file names b. conditions c. check marks d. action types

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Write pseudocode to represent the logic of a program that allows the user to enter a value. the program multiplies the value by 10 and outputs the result.