Find the double word length of 2's complement 3874

Your program will make use of long long int variables for all calculations. note: the use of long long int requires that you have c++11 support. you should have this automatically if you are using a newer version of visual studio. the support is there for gcc as well, but you may need the -std=c++11 or -std=c++0x compiler flag. you first need to read in the total number of seconds. there is no prompt for the read (that is, you just do the cin without using a cout to display a prompt). this is going to seem a little strange when you are running your program in your ide

Write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removedproblems 1.1 write a computer program to calculate the three-phase fault current for a fault at f in figure 1.16, with the network normal, and with one line at a time removed 20 power system relaying from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0+j0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the stub-end fault í• figure 1.16 problem 1.1 system data for figure 1.16 from to positive sequence 0.0+j0.1 0.05j0.15 0.04 j0.2 0.01 jo.i 0.015 + j0.15 0.01 j0.19 0.01 +j0.19 0.03+j0.1 0.0+j0.08 6 6 6 from service. the positive-sequence impedance data are given in the accompanying table. use the commonly made assumption that all prefault resistance values are (1.0 + j 0.0) pu, and neglect all resistance values. calculate the contribution to the fault flowing through the cb b1, and the voltage at that bus. for each calculated case, consider the two possibilities: cb b2 closed or open. the latter is known as the “stub-end” fault.

Howard is designing a chair swing ride. the swing ropes are 5 meters long, and in full swing they tilt in an angle of 29° outside chairs to be 2.75 m above the ground in full swing.