Computers and Technology, 07.01.2021 23:30 riaahroo2378

Test if a password entered is correct. The secret phrase is Ada Lovelace. Sample Run 1
Enter the Password: Ada Lovelace
Sample Output 1
Correct!
Sample Run 2
Enter the Password: Blaise Pascal
Sample Output 2
Not Correct

for Python

Answers: 1

Show answers

Another question on Computers and Technology

Computers and Technology, 22.06.2019 23:50

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Answers: 3

Answer

Computers and Technology, 23.06.2019 04:31

This graph compares the cost of room and board at educational institutions in texas.

Answers: 1

Answer

Computers and Technology, 23.06.2019 09:00

Before you record your own voice, you should a. record other people's voices b. warm up and practice difficult names c. listen to your favorite songs d. read a transcript of a good radio news segment

Answers: 1

Answer

Computers and Technology, 23.06.2019 19:00

Write a program that displays the following menu: geometry calculator 1. calculate the area of a circle 2. calculate the area of a rectangle 3. calculate the area of a triangle 4. quit enter your choice (1-4): if the user enters 1, the program should ask for the radius of the circle and then display its area. use the following formula: area = ď€(the square of r) use 3.14159 for ď€ and the radius of the circle for r. if the user enters 2, the program should ask for the length and width of the rectangle and then display the rectangleâ€™s area. use the following formula: area = length * width if the user enters 3, the program should ask for the length of the triangleâ€™s base and its height, and then display its area. use the following formula: area = base * height * .5 if the user enters 4, the program should end. input validation: display an error message if the user enters a number outside the range of 1 through 4 when selecting an item from the menu. do not accept negative values for the circleâ€™s radius, the rectangleâ€™s length or width, or the triangleâ€™s base or height. note: if the user enters an improper menu choice (1-4), the program prints "the valid choices are 1 through 4. run the program again and select one of those." if the user enters a negative radius, the program prints "the radius can not be less than zero." if the user enters a negative value for height or base, the program prints "only enter positive values for base and height."

Answers: 1

Answer

You know the right answer?

Test if a password entered is correct. The secret phrase is Ada Lovelace. Sample Run 1
Enter...

Questions