Hydraulic pressure is the same throughout the inside of a set of brake lines. What determines the amount of resulting mechanical force is the size of the piston in the wheel cylinder or caliper. For example: 100 psi of fluid pressure acting against a caliper piston
with 4 square inches of surface area will result in 400 lbs of clamping force.
A fluid line with 200 psi in it acting against a piston with 3 square inches of area would result in 600 lbs of force.
A fluid line with 50 psi acting on a larger piston with 12 square inches of surface area would result in 600 lbs of force, and so on...
How much fluid pressure would it take to lift a 6000 lb truck on a lift with a 60 quare inch piston (such as on an automotive lift)?
Give your answer and try to justify your answer using an equation or formula.. Pressure x surface area equals mechanical force,
or... force divided by surface area equals fluid pressure

Determine which of the four levels of measurement (nominal, ordinal, interval, ratio) is most appropriate for the data below. internet speed levels of "fast comma " "medium comma " and "slow" choose the correct answer below. a. the ordinal level of measurement is most appropriate because the data can be ordered comma but differences left parenthesis obtained by subtraction right parenthesis cannot be found or are meaningless. nothing nothing nothing nothing nothing b. the interval level of measurement is most appropriate because the data can be ordered comma differences left parenthesis obtained by subtraction right parenthesis can be found and are meaningful comma and there is no natural starting point. c. the nominal level of measurement is most appropriate because the data cannot be ordered. nothing d. the ratio level of measurement is most appropriate because the data can be ordered comma differences left parenthesis obtained by subtraction right parenthesis can be found and are meaningful comma and there is a natural starting point.

If you embed a word table into powerpoint, what happens when you make edits to the embedded data? a. edits made to embedded data change the data in the source file; however, edits made to the source file will not be reflected in the embedded data. b. edits made to embedded data will change the data in the source file, and edits made to the source file will be reflected in the embedded data. c. edits made to embedded data don't change the data in the source file, nor will edits made to the source file be reflected in the embedded data. d. edits made to embedded data don't change the data in the source file; however, edits made to the source file will be reflected in the embedded data.

Computer security/cybersecurity1) each of the following code fragments contains a number of security vulnerabilities. for each fragment, identify these security vulnerabilities and, for each vulnerability, discuss at least one way that it could be improved. note that in your discussion of how each vulnerability could be improved, you do not need to re-write a new version of the program in c; simply discuss your solution, either in pseudocode or in 1-2 sentences.a) /* file descriptor leak */#include #include int main(int argc, char *argv[]){ char *filepath = argv[0]; char *shellpath = argv[1]; file *passwords; passwords = fopen(filepath, "r"); /* read the password and do something with it */ /* . . */ /* fork and execute alternative shell */ execl(shellpath, "shell", null); }b)#include /* assume the following function is written for an electronic storefront. the user will enter the id of the item to be ordered, as well as the quantity of units that they would like to purchase. the program will then lookup the price for the price for the item using a predefined function, and return the total cost of the order.*/int gettotalcost(){ char itemid[9]; int price, unitsordered, cost; printf(" enter the 9-digit id of the item to be ordered: "); scanf("%s", & itemid); /* lookup the price according to the itemid */ price = getpricebyid(itemid); printf(" enter the quantity of units to be ordered: "); scanf("%d", & unitsordered); cost = price * unitsordered; return cost; }c)#include /* the following function is intended to return a user's full name by concatenating the user's first and last name into a single string and then returning that string. */char *getfullname(char *firstname, char *lastname, int max_len){ char fullname[max_len]; strcpy(fullname, firstname); strcat(fullname, " "); strcat(fullname, lastname); return fullname; }d)#include /* the following code snippet runs through the list of cli arguments entered and displays them to the console. */int main(int argc, char *argv[]){ int i; printf("you've entered the following arguments: "); for(i = 0; i < argc; i++){ print(argv[i]); printf("\n"); } /* */}