A car showroom consists of N numbered spaces. Each space can hold at most one car. The spaces are indexed starting from 0 though the last space, N - 1. No two cars in the showroom are the same model. Write the CarShowroom method findCarSpace. This method returns the index of the space in which the car with the specified model is located. If there is no car of that model in the showroom, the method returns -1. Then write the CarShowroom method consolidate. This method should move the cars so that cars in adjacent spaces, starting at index 0, have no empty spaces between any two cars. Keep the order of the cars the same as the array in the code shows.

You need a reliable network for about twenty-five computers that will be distributed across a large building. it is important that the network be relatively cheap. which topology should you use?

Consider a slotted aloha system, where the time slot equals the fixed duration of each packet. assume that there are 4 stations a,b,c,d sharing the medium. (a) stations a,b,c,d receive one packet each from higher layers at times 1.3, 1.5, 2.6,5.7 respectively. show which transmissions take place when, according to the slottedaloha protocol; describe all transmissions until all four packets have been successful.when needed, each station has access to the following sequence of random number, provided by a random number generator and drawn uniformly between 0 and 1: (1) station a draws numbers: 0.31, 0.27, 0.78, 0.9, 0.9, 0.11, 0. (2) station b draws numbers: 0.45, 0.28, 0.11, 0.83, 0.37, 0.22, 0. (3)station c draws numbers: 0.1, 0.2, 0.3, 0.4, 0. (4) station d draws numbers: 0.36, 0.77, 0.9, 0.1, 0.1, 0.1, 0.1, 0. (b) in slotted aloha, a station transmits in each time slot with a given probability. what probabilities would you assign to each of the four stations so as to: (i) maximize the efficiency of the protocol? (ii) maximize fairness among the four stations? (c) will the efficiency increase or decrease if we modify slotted aloha as follows: (i) get rid of slots and allow stations to transmit immediately? (ii) implement carrier sensing? (iii) implement collision detection? (iv) implement collision avoidance?

Knowing that the central portion of link bd has a uniform cross sectional area of 800 mm2 , determine the magnitude of the load p for which the normal stress in link bd is 50 mpa. (hint: link bd is a two-force member.) ans: p = 62.7 kn