Build a sequence detector for the following binary input sequence: 0001, where the left-most binary input happened first. The sequence detector should detect all instances of the target sequence by outputting 1 when the sequence is detected and 0 when the sequence is not detected. Example, a sequence detector for the different sequence 1101 should have the following pattern. IN : 0 1 1 0 1 1 0 1 0 1 OUT: 0 0 0 0 1 0 0 1 0 0 The 1-bit input to this sequence detector is called i. The 1-bit output to this sequence detector is called o.

Ihave an iphone 8plus should i get another phone like samsung note 9 or s9 ? ?

Farah works in an office with two other employees. all three share a printer and an internet connection. the utility that makes this possible is defragger quicktime soho winzip

Given a link with a maximum transmission rate of 32.8 mbps. only two computers, x and y, wish to transmit starting at time t = 0 seconds. computer x sends filex (4 mib) and computer y sends filey (244 kib), both starting at time t = 0. statistical multiplexing is used, with details as follows packet payload size = 1000 bytes packet header size = 24 bytes (overhead) ignore processing and queueing delays assume partial packets (packets consisting of less than 1000 bytes of data) are padded so that they are the same size as full packets. assume continuous alternating-packet transmission. computer x gets the transmission medium first. at what time (t = ? ) would filey finish transmitting? give answer in milliseconds, without units, and round to one decimal places (e.g. for an answer of 0.013777 seconds you would enter "13.8" without the quotes)