Write a program to draw ghosts on the screen. You must do this by writing a function called draw_ghost, which takes three parameters, the x location of the ghost, the y location of the ghost and the color of the ghost. x and y for the ghost define where the center of the head should go. Note: Be sure to include comments for all functions that you use or create.

def draw_ghost(center_x, center_y, color):
Final Product
Here is a screenshot of a sample run of the ghosts program with these function calls.

center_x = get_width()/2
center_y = get_height()/2
draw_ghost(center_x, center_y, Color. red)
draw_ghost(100, 100, Color. green)
draw_ghost(370, 150, Color. black)
draw_ghost(40, 200, Color. orange)
draw_ghost(300, 50, Color. yellow)

5.a fishing rod is formed from a composite material of 0.5 kg of glass fibers embedded in a matrix of 0.5 kg of epoxy resin. the glass fibers are assumed to be long, continuous and unidirectional. to achieve a greater stiffness it is proposed to use a different composite that is comprised of long continuous carbon fibers that will be embedded in a matrix of 0.5 kg of epoxy resin. if the modulus of elasticity of the carbon fiber composite is 10% greater than the elastic modulus of the glass fiber composite, estimate the mass of carbon fibers that will be used to make the carbon fiber composite. assume the applied tensile stress is parallel to the direction of the long axis of the fibers. the epoxy resin, glass fiber, and carbon fiber have an elastic modulus of 5, 86, and 350 gpa respectively and a density of 1100, 2500, and 1800 respectively.