Among the MS Word Basic Commands that you have listed in the prior activity given above, choose only one (1) then illustrate through a drawing the steps in performing the said command. hel po​

Rafael needs to add a title row to a table that he has inserted in word. what should he do? use the alignment options. use the merge and center option for all the cells in the top row. use the merge and center option on the first two cells in the top row. none of the above

From excel to powerpoint, you can copy and paste a. cell ranges and charts, one at a time. b. cell ranges and charts, simultaneously. c. charts only. d. cell ranges only.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to